Lesson plan

Sparklies

Sparklies is a form of interference on analogue satellite television transmissions. Sparklies are black or white 'hard' interference dots (as opposed to the 'soft' interference patterns of terrestrial television), caused either by too weak or too strong a signal. When within the satellite's rated reception footprint, sparklies are most likely to be caused by a misaligned dish, or LNBs which are too high- or too low-gain for the dish and receiver. The term "sparklies" is used by British Sky Broadcasting (BSkyB) and a number of hardware makers including Amstrad and Pace. Sparklies do not occur on digital satellite systems; similar problems with digital signals cause MPEG artifacts.

Back to article

Article summary

Sparklies is a form of interference on analogue satellite television transmissions. Sparklies are black or white 'hard' interference dots (as opposed to the 'soft' interference patterns of terrestrial television), caused either by too weak or too strong a signal. When within the satellite's rated reception footprint, sparklies are most likely to be caused by a misaligned dish, or LNBs which are too high- or too low-gain for the dish and receiver. The term "sparklies" is used by British Sky Broadcasting (BSkyB) and a number of hardware makers including Amstrad and Pace. Sparklies do not occur on digital satellite systems; similar problems with digital signals cause MPEG artifacts.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.