Speckle imaging

) as seen through atmospheric turbulence.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

) as seen through atmospheric turbulence. Each star should appear as a single point, but the atmosphere causes the images of the two stars to break up into two patterns of speckles. The speckles move around rapidly, so that each star appears as a single fuzzy blob in long exposure images.

Speckle imaging comprises a range of high-resolution astronomical imaging techniques based on the analysis of large numbers of short exposures that freeze the variation of atmospheric turbulence. They can be divided into the shift-and-add (image stacking) method and the speckle interferometry methods.

These techniques can dramatically increase the resolution of ground-based telescopes, but are limited to bright targets. Speckle imaging recreates the original image through image processing techniques. The key to the technique, found by the American astronomer David L. Fried in 1966, was to take very fast images in which case the atmosphere is effectively "frozen" in place.

At infrared wavelengths, coherence times τ 0 are on the order of 100 ms, but for the visible region they drop to as little as 10 ms. When exposure times are shorter than τ 0 , the movement of the atmosphere is too sluggish to have an effect; the speckles recorded in the image are a snapshot of the atmospheric seeing at that instant. Coherence time τ 0 = r 0 /v is a function of wavelength, because r 0 is a function of wavelength.

The downside of the technique is that taking images at this short an exposure is difficult, and if the object is too dim, not enough light will be captured to make analysis possible. Early uses of the technique in the early 1970s were made on a limited scale using photographic techniques, but since photographic film captures only about 7% of the incoming light, only the brightest of objects could be viewed in this way.

The introduction of the CCD into astronomy, which captures more than 70% of the light, lowered the bar on practical applications by an order of magnitude, and today the technique is widely used on bright astronomical objects (e.g. stars and star systems). Many of the simpler speckle imaging methods have multiple names, largely from amateur astronomers re-inventing existing speckle imaging techniques and giving them new names.

Another use of the technique is in industry. By shining a laser (whose smooth wavefront is an excellent simulation of the light from a distant star) on a surface, the resulting speckle pattern can be processed to give detailed images of flaws in the material.

See also

Aperture masking interferometry Aperture synthesis Astronomical interferometer Bispectral analysis Diffraction-limited system Electronic speckle pattern interferometry Focus stacking Holographic interferometry Lucky imaging Optical interferometry Super-resolution X-ray photon correlation spectroscopy

Hugin - open source image software with shift-and-add "image-stacking" Iris - freeware astronomical images processing software Autostakkert - alignment and stacking of image sequences, minimizing the influence of atmospheric distortions

Text derived from https://en.wikipedia.org/w/index.php?oldid=1371664839 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.