Lesson plan
Spectral density
as a function of optical wavelength shows peaks at atomic transitions, indicated by the numbered arrows. In signal processing, the power spectrum S_{xx}(f) of a continuous time signal x(t) describes the distribution of power into frequency components f composing that signal. Fourier analysis shows that any physical signal can be decomposed into a distribution of frequencies over a continuous range, where some of the power may be concentrated at discrete frequencies. The statistical average of the energy or power of any type of signal (including noise) as analyzed in terms of its frequency content, is called its spectral density. When the energy of the signal is concentrated around a finite time interval, especially if its total energy is finite, one may compute the energy spectral density. More commonly used is the power spectral density (PSD, or simply power spectrum), which applies to signals existing over all time, or over a time period large enough (especially in relation to the duration of a measurement) that it could as well have been over an infinite time interval. The PSD then refers to the spectral power distribution that would be found, since the total energy of such a signal over all time would generally be infinite.…
Article summary
as a function of optical wavelength shows peaks at atomic transitions, indicated by the numbered arrows. In signal processing, the power spectrum S_{xx}(f) of a continuous time signal x(t) describes the distribution of power into frequency components f composing that signal. Fourier analysis shows that any physical signal can be decomposed into a distribution of frequencies over a continuous range, where some of the power may be concentrated at discrete frequencies. The statistical average of the energy or power of any type of signal (including noise) as analyzed in terms of its frequency content, is called its spectral density. When the energy of the signal is concentrated around a finite time interval, especially if its total energy is finite, one may compute the energy spectral density. More commonly used is the power spectral density (PSD, or simply power spectrum), which applies to signals existing over all time, or over a time period large enough (especially in relation to the duration of a measurement) that it could as well have been over an infinite time interval. The PSD then refers to the spectral power distribution that would be found, since the total energy of such a signal over all time would generally be infinite.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.