Lesson plan

Spectral sensitivity

spectra) of human cone cells, S, M, and L types Spectral sensitivity is the relative efficiency of detection, of light or other signal, as a function of the frequency or wavelength of the signal. In visual neuroscience, spectral sensitivity is used to describe the different characteristics of the photopigments in the rod cells and cone cells in the retina of the eye. It is known that the rod cells are more suited to scotopic vision and cone cells to photopic vision, and that they differ in their sensitivity to different wavelengths of light. It has been established that the maximum spectral sensitivity of the human eye under daylight conditions is at a wavelength of 555 nm, while at night the peak shifts to 507 nm. In photography, film and sensors are often described in terms of their spectral sensitivity, to supplement their characteristic curves that describe their responsivity. A database of camera spectral sensitivity is created and its space analyzed. For X-ray films, the spectral sensitivity is chosen to be appropriate to the phosphors that respond to X-rays, rather than being related to human vision. In sensor systems, where the output is easily quantified, the responsivity can be extended to be wavelength dependent, incorporating the spectral sensitivity.…

Back to article

Article summary

spectra) of human cone cells, S, M, and L types Spectral sensitivity is the relative efficiency of detection, of light or other signal, as a function of the frequency or wavelength of the signal. In visual neuroscience, spectral sensitivity is used to describe the different characteristics of the photopigments in the rod cells and cone cells in the retina of the eye. It is known that the rod cells are more suited to scotopic vision and cone cells to photopic vision, and that they differ in their sensitivity to different wavelengths of light. It has been established that the maximum spectral sensitivity of the human eye under daylight conditions is at a wavelength of 555 nm, while at night the peak shifts to 507 nm. In photography, film and sensors are often described in terms of their spectral sensitivity, to supplement their characteristic curves that describe their responsivity. A database of camera spectral sensitivity is created and its space analyzed. For X-ray films, the spectral sensitivity is chosen to be appropriate to the phosphors that respond to X-rays, rather than being related to human vision. In sensor systems, where the output is easily quantified, the responsivity can be extended to be wavelength dependent, incorporating the spectral sensitivity.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.