Lesson plan
Spectral width
In telecommunications, spectral width is the width of a spectral band, i.e., the range of wavelengths or frequencies over which the magnitude of all spectral components is significant, i.e., equal to or greater than a specified fraction of the largest magnitude. In fiber-optic communication applications, the usual method of specifying spectral width is the full width at half maximum (FWHM). This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most −3 dB). The FWHM method may be difficult to apply when the spectrum has a complex shape. Another method of specifying spectral width is a special case of root-mean-square deviation where the independent variable is wavelength, λ, and f (λ) is a suitable radiometric quantity. The relative spectral width, Δλ/λ, is frequently used where Δλ is obtained according to note 1, and λ is the center wavelength.
Article summary
In telecommunications, spectral width is the width of a spectral band, i.e., the range of wavelengths or frequencies over which the magnitude of all spectral components is significant, i.e., equal to or greater than a specified fraction of the largest magnitude. In fiber-optic communication applications, the usual method of specifying spectral width is the full width at half maximum (FWHM). This is the same convention used in bandwidth, defined as the frequency range where power drops by less than half (at most −3 dB). The FWHM method may be difficult to apply when the spectrum has a complex shape. Another method of specifying spectral width is a special case of root-mean-square deviation where the independent variable is wavelength, λ, and f (λ) is a suitable radiometric quantity. The relative spectral width, Δλ/λ, is frequently used where Δλ is obtained according to note 1, and λ is the center wavelength.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.