Spider silk
wraps her prey in silk. by Józef Chełmoński (1875, National Museum in Warsaw) depicts a peasant woman with a thread of gossamer in her hand.
≈ 13 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
wraps her prey in silk. by Józef Chełmoński (1875, National Museum in Warsaw) depicts a peasant woman with a thread of gossamer in her hand. Spider silk is a protein fibre or silk spun by spiders.
Spiders use silk to make webs or other structures that function as adhesive traps to catch prey, to entangle and restrain prey before biting, to transmit tactile information, or as nests or cocoons to protect their offspring. They can use the silk to suspend themselves from height, to float through the air, or to glide away from predators.
Most spiders vary the thickness and adhesiveness of their silk according to its use. In some cases, spiders may use silk as a food source. While methods have been developed to collect silk from a spider by force, gathering silk from many spiders is more difficult than from silk-spinning organisms such as silkworms.
All spiders produce silk, although some spiders do not make webs. Silk is tied to courtship and mating. Silk produced by females provides a transmission channel for male vibratory courtship signals, while webs and draglines provide a substrate for female sex pheromones.
Observations of male spiders producing silk during sexual interactions are common across widespread taxa. The function of male-produced silk in mating has received little study.
Properties
File:Schematic of the spider's orb web, structural modules, and spider silk structure.png|Schematic of the spider's orb web, structural modules, and spider silk structure. On the left is shown a schematic drawing of an orb web. The red lines represent the dragline, radial line, and frame lines.
The blue lines represent the spiral line, and the centre of the orb web is called the "hub". Sticky balls drawn in blue are made at equal intervals on the spiral line with viscous material secreted from the aggregate gland. Attachment cement secreted from the piriform gland is used to connect and fix different lines.
Microscopically, the spider silk secondary structure is formed of spidroin with the structure shown on the right side. In the dragline and radial line, a crystalline β-sheet and an amorphous helical structure are interwoven. The large amount of β-spiral structure gives elastic properties to the capture part of the orb web.
In the structural modules diagram, a microscopic structure of dragline and radial lines is shown, composed mainly of two proteins of MaSp1 and MaSp2, as shown in the upper central part. The spiral line has no crystalline β-sheet region.
Mechanical
Each spider and each type of silk has a set of mechanical properties optimised for their biological function. Most silks, in particular dragline silk, have exceptional mechanical properties. They exhibit a unique combination of high tensile strength and extensibility (ductility).
This enables a silk fibre to absorb a large amount of energy before breaking (toughness, the area under a stress-strain curve). Strength and toughness are distinct quantities. Weight for weight, silk is stronger than steel, but not as strong as Kevlar.
Spider silk is, however, tougher than both. The variability of spider silk fibre mechanical properties is related to their degree of molecular alignment. Mechanical properties also depend on ambient conditions, i.e. humidity and temperature.
Tensile strength
A dragline silk's tensile strength is comparable to that of high-grade alloy steel (450−2000 MPa), and about half as strong as aramid filaments, such as Twaron or Kevlar (3000 MPa). According to Spider Silkome Database, Clubiona vigil silk has the highest tensile strength.
Density
Consisting of mainly protein, silks are about a sixth of the density of steel (1.3 g/cm 3 ). As a result, a strand long enough to circle the Earth would weigh about . (Spider dragline silk has a tensile strength of roughly 1.3 GPa. The tensile strength listed for steel might be slightly higher e.g. 1.65 GPa, but spider silk is a much less dense material, so that a given weight of spider silk is five times as strong as the same weight of steel.)
Energy density
The energy density of dragline spider silk is roughly .
Ductility
Silks are ductile, with some able to stretch up to five times their relaxed length without breaking.
Toughness
The combination of strength and ductility gives dragline silks a high toughness (or work to fracture), which "equals that of commercial polyaramid (aromatic nylon) filaments, which themselves are benchmarks of modern polymer fibre technology". According to Spider Silkome Database, Araneus ishisawai silk is the toughest.
Temperature
While unlikely to be relevant in nature, dragline silks can hold their strength below -40 °C (-40 °F) and up to 220 °C (428 °F). As occurs in many materials, spider silk fibres undergo a glass transition. The glass-transition temperature depends on humidity, as water is a plasticiser for spider silk.
Supercontraction
When exposed to water, dragline silks undergo supercontraction, shrinking up to 50% in length and behaving like a weak rubber under tension. Many hypotheses have attempted to explain its use in nature, most popularly to re-tension webs built in the night using the morning dew.
Highest-performance
The toughest known spider silk is produced by the species Darwin's bark spider (Caerostris darwini): "The toughness of forcibly silked fibers averages 350 MJ/m 3 , with some samples reaching 520 MJ/m 3 . Thus, C. darwini silk is more than twice as tough as any previously described silk and over 10 times tougher than Kevlar".
Adhesive
Silk fibre is a two-compound pyriform secretion, spun into patterns (called "attachment discs") using a minimum of silk substrate. The pyriform threads polymerise under ambient conditions, become functional immediately, and are usable indefinitely, remaining biodegradable, versatile and compatible with other materials in the environment.
The adhesive and durability properties of the attachment disc are controlled by functions within the spinnerets. Some adhesive properties of the silk resemble glue, consisting of microfibrils and lipid enclosures.
Synthesis and fibre spinning
spinning its web Silk production differs in an important aspect from that of most other fibrous biomaterials. It is pulled on demand from a precursor out of specialised glands, rather than continuously grown like plant cell walls.
The spinning process occurs when a fibre is pulled away from the body of a spider, whether by the spider's legs, by the spider's falling under its own weight, or by any other method. The term "spinning" is misleading because no rotation occurs. It comes from analogy to the textile spinning wheels.
Silk production is a pultrusion, similar to extrusion, with the subtlety that the force is induced by pulling at the finished fibre rather than squeezing it out of a reservoir. The fibre is pulled through (possibly multiple) silk glands of multiple types.
Silk gland
The gland's visible, or external, part is termed the spinneret. Depending on the complexity of the species, spiders have two to eight spinnerets, usually in pairs. Species have varying specialised glands, ranging from a sac with an opening at one end, to the complex, multiple-section ampullate glands of the golden silk orb-weavers.
Behind each spinneret on the surface of the spider lies a gland, a generalised form of which is shown in the figure. Gland characteristics . Each differently coloured section highlights a discrete section of the gland.
The leftmost section is the secretory or tail section. The walls of this section are lined with cells that secrete proteins Spidroin I and Spidroin II, the main components of this spider's dragline.
These proteins are found in the form of droplets that gradually elongate to form long channels along the length of the final fibre, hypothesised to assist in preventing crack formation or self-healing. The ampulla (storage sac) is next. This stores and maintains the gel-like unspun silk dope.
In addition, it secretes proteins that coat the surface of the final fibre. The funnel rapidly reduces the large diameter of the storage sac to the small diameter of the tapering duct. The final length is the tapering duct, the site of most of the fibre formation.
This consists of a tapering tube with several tight sharp turns, a valve near the end includes a spigot from which the solid silk fibre emerges. The tube tapers hyperbolically, therefore the unspun silk is under constant elongational shear stress, an important factor in fibre formation.
This section is lined with cells that exchange ions, reduce the dope pH from neutral to acidic, and remove water from the fibre. Collectively, the shear stress and the ion and pH changes induce the liquid silk dope to undergo a phase transition and condense into a solid protein fibre with high molecular organisation.
The spigot at the end has lips that clamp around the fibre, controlling fibre diameter and further retaining water. Almost at the end is a valve. Though discovered some time ago, its precise purpose is still under discussion.
It is believed to assist in restarting and rejoining broken fibres, acting much in the way of a helical pump, regulating the thickness of the fibre, and/or clamping the fibre as a spider falls upon it. The similarity of the silk worm's silk press and the roles each of these valves play in the silk production in these two organisms are under discussion.
Throughout the process the silk appears to have a nematic texture, in a manner similar to a liquid crystal, arising in part due to the high protein concentration of silk dope (around 30% in terms of weight per volume). This allows the silk to flow through the duct as a liquid while maintaining molecular order.
As an example of a complex spinning field, the spinneret apparatus of an adult Araneus diadematus (garden cross spider) consists of many glands shown below. A similar gland architecture appears in the black widow spider.
500 pyriform glands for attachment points 4 ampullate glands for the web frame 300 aciniform glands for the outer lining of egg sacs, and for ensnaring prey 4 tubuliform glands for egg sac silk 4 aggregate glands for adhesive functions 2 coronate glands for the thread of adhesion lines
Artificial synthesis
To artificially synthesise spider silk into fibres, two broad tasks are required. These are synthesis of the feedstock (the unspun silk dope in spiders), and synthesis of the production conditions (the funnel, valve, tapering duct, and spigot). Few strategies have produced silk that can efficiently be synthesised into fibres.
Feedstock
The molecular structure of unspun silk is both complex and long. Though this endows the fibres with desirable properties, it also complicates replication. Various organisms have been used as a basis for attempts to replicate necessary protein components. These proteins must then be extracted, purified, and then spun before their properties can be tested.
Geometry
Spider silks with comparatively simple molecular structure need complex ducts to be able to form an effective fibre. Approaches:
Syringe and needle
Feedstock is forced through a hollow needle using a syringe. Although cheap and easy to produce, gland shape and conditions are loosely approximated. Fibres created using this method may need encouragement to solidify by removing water from the fibre with chemicals such as (environmentally undesirable) methanol or acetone, and also may require later stretching of the fibre to achieve desirable properties.
Superhydrophobic surfaces
Placing a solution of spider silk on a superhydrophobic surface can generate sheets, particles, and nanowires of spider silk.
Sheets
Self-assembly of silk at standing liquid-gas interphases of a solution tough and strong sheets. These sheets are now explored for mimicking the basal membrane in tissue modeling.
Microfluidics
Microfluidics have the advantage of being controllable and able to test spin small volumes of unspun fibre, but setup and development costs are high. A patent has been granted and continuously spun fibres have achieved commercial use.
Electrospinning
Electrospinning is an old technique whereby a fluid is held in a container such that it flows out through capillary action. A conducting substrate is positioned below, and a difference in electrical potential is applied between the fluid and the substrate.
The fluid is attracted to the substrate, and tiny fibres jump from their point of emission, the Taylor cone, to the substrate, drying as they travel. This method creates nano-scale fibres from silk dissected from organisms and regenerated silk fibroin.
Human uses
silk The earliest recorded attempt to weave fabric from spider silk was in 1709 by François Xavier Bon who, using a process similar to creating silkworm silk, wove silk derived from spider's egg cocoons into stockings and gloves. Fifty years later Jesuit missionary invented a reeling device for harvesting spider silk directly from spiders, allowing it to be spun into threads.
Neither Bon nor Termeyer were successful in producing commercially viable quantities. The development of methods to mass-produce spider silk led to the manufacturing of military, medical, and consumer goods, such as ballistic armour, athletic footwear, personal care products, breast implant and catheter coatings, mechanical insulin pumps, fashion clothing, and outerwear.
However, due to the difficulties in extracting and processing, the largest known piece of cloth made of spider silk is an textile with a golden tint made in Madagascar in 2009. Eighty-two people worked for four years to collect over one million golden orb spiders and extract silk from them. In 2012, spider silk fibres were used to create a set of violin strings.
External links
"The Silk Spinners", a BBC program about silk-producing animals Archived at Ghostarchive and the Wayback Machine :
Text derived from https://en.wikipedia.org/w/index.php?oldid=1370102600 under CC BY-SA 4.0; modifications have been made.