Lesson plan
Spin casting (mirrors)
Spin casting is a technique for constructing large parabolic mirrors by using the curved surface formed by a rotating liquid (e.g. in a rotating furnace). It is distinct from the spin casting or centrifugal rubber mold casting (CRMC) technique used for casting metal or plastics. Pioneered by Roger Angel at the Steward Observatory's mirror lab, this makes large ( ) thin parabolic mirrors by spinning the oven as the glass is melted and cooled. The term is applied to the fabrication of large telescope mirrors, where the natural paraboloid curve followed by the molten glass greatly reduces the amount of grinding required. Rather than being cast by pouring glass into a mold (with top and bottom), an entire turntable containing the peripheral mold, and the back pattern (a honeycomb pattern to lighten the finished product) is contained within a furnace and charged with the glass material used. The assembly (or rotating furnace) is then heated while spun at slow speed until the glass is liquid, then gradually cooled over a period of months.
Article summary
Spin casting is a technique for constructing large parabolic mirrors by using the curved surface formed by a rotating liquid (e.g. in a rotating furnace). It is distinct from the spin casting or centrifugal rubber mold casting (CRMC) technique used for casting metal or plastics. Pioneered by Roger Angel at the Steward Observatory's mirror lab, this makes large ( ) thin parabolic mirrors by spinning the oven as the glass is melted and cooled. The term is applied to the fabrication of large telescope mirrors, where the natural paraboloid curve followed by the molten glass greatly reduces the amount of grinding required. Rather than being cast by pouring glass into a mold (with top and bottom), an entire turntable containing the peripheral mold, and the back pattern (a honeycomb pattern to lighten the finished product) is contained within a furnace and charged with the glass material used. The assembly (or rotating furnace) is then heated while spun at slow speed until the glass is liquid, then gradually cooled over a period of months.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.