Spinnaker
≈ 5 min read
Names in other languages
- DeutschSpinnaker
- EnglishSpinnaker
- NederlandsSpinnaker
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
with masthead spinnaker in front of Calshot Spit A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually nylon, and are often brightly colored. They may be designed to perform best as either a reaching or a running spinnaker, by the shaping of the panels and seams. They are attached at only three points and said to be flown.
with masthead spinnaker in front of Calshot Spit A spinnaker is a sail designed specifically for sailing off the wind on courses between a reach (wind at 90° to the course) to downwind (course in the same direction as the wind). Spinnakers are constructed of lightweight fabric, usually nylon, and are often brightly colored. They may be designed to perform best as either a reaching or a running spinnaker, by the shaping of the panels and seams. They are attached at only three points and said to be flown.
Ratings
The following codes are used for both symmetric and asymmetric sails. Code 1 is a light air reaching sail, where the apparent wind angles at low speeds has a significant effect to create angles of less than 90 degrees. Code 2 is a medium air running sail, used for apparent wind angles over 90 degrees. Code 3 is a medium air reaching sail, used for apparent wind angles near 90 degrees. Code 4 is a heavy air running sail, used in the heaviest winds normally expected. Code 5 is a heavy air reaching sail, used in the heaviest winds normally expected. Code 6 is a storm sail, for running in storm conditions.
Dousing socks
The dousing sock, "spinnaker sleeve", snuffer, or just sock, is a device used to make deploying and retrieving the spinnaker a much easier task. The sock is a long fabric tube with a ring in one end to hold it open. Since the spinnaker is stored in the sock, the first step is to set up the sock. Two lines are attached to the sock; one is attached to a bridle on the ring, for pulling the sock down, and one is up the inside, from the ring, through the top, and back down, for raising the sock; these lines may be two ends of the same line, to form a loop. The head of the spinnaker is attached to the top of the sock and the ring runs down to the tack. The resulting bundle is stuffed into the spinnaker bag. The top of the sock will have provisions for attaching to the spinnaker halyard. The spinnaker is raised as normal, but with the sock in place, the spinnaker is unable to catch the wind. Once the spinnaker is raised and the guys are ready to set, the sock is raised, releasing the spinnaker. The sock remains bundled up at the head of the sail while the spinnaker is deployed. To retrieve the spinnaker, the sheet or the tack is released and the sock is pulled down, gathering the sail. The halyard is then dropped and the sail may be packed away.
Spinnaker launching and dousing systems
As of 2006, there were a variety of means to aid the launching (hoisting) and dousing (taking down) of a spinnaker—a sail which, in lacking luff support, is "more unstable and more difficult" to handle in these and related situations. One system focuses on the launching of the spinnaker, only, and it makes use of special sail-packing and a funnel system that places breakable elastic bands as the sail is launched, bands that break as sheet and guy of the filled spinnaker are trimmed. Other systems use means that assist with both launching and dousing, and such systems include: sail modification to include a center patch and cringle to attach a retriever line (also termed a "takedown line") to use in sail launching and dousing, and use of a funnel-terminating, hull-affixed tubular launcher for storage and launching (through which the retriever passes); and used of a tubular, ring-ended sleeve or "sock" which also stores the sail, which after launching (sock hoisting) is rigged such that the sock's top ring is toward the halyard and bottom ring toward the deck, where release of the spinnaker is accomplished by rigging that draws the bottom ring toward the halyard, allowing the bottom of the sail to fill, a design that leaves the collapsed sock aloft "at the head of the spinnaker while it is flying".
Spinnaker chutes
A spinnaker chute is a means of launching and dousing (recovering) the spinnaker. Found most commonly on modern dinghy designs and updated older classes, it often consists of a tube or an aperture mounted on the deck close to the forestay. To allow recovery of the spinnaker into the chute during dousing, the spinnaker is fitted with one or more recovery patches to, or through which, the tail of the spinnaker halyard is attached or passed; the spinnaker head and its halyard form a continuous loop, passing through the chute. If the spinnaker chute is within the hull and is required to be watertight, it takes the form of a hard tube sealed to the hull at both ends. If a watertight arrangement is not required, a cloth tube may be used to contain the lowered spinnaker.
Other uses
A masthead, symmetrical spinnaker is occasionally used for entertainment at anchor to loft a person hanging beneath it above the water. To work, the vessel must be anchored stern to the wind to allow the sail to extend out over the bow.
References
External links
Text derived from https://en.wikipedia.org/w/index.php?oldid=1366623330 under CC BY-SA 4.0; modifications have been made.