Spinning drop method

Uses your system voice; voice and rate in settings.

Q7577621Snapshot

≈ 4 min read

Names in other languages

  • EnglishSpinning drop method

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The spinning drop method or rotating drop method is one of the methods used to measure interfacial tension. Measurements are carried out in a rotating horizontal tube which contains a dense fluid. A drop of a less dense liquid or a gas bubble is placed inside the fluid. Since the rotation of the horizontal tube creates a centrifugal force towards the tube walls, the liquid drop will start to deform into an elongated shape; this elongation stops when the interfacial tension and centrifugal forces are balanced. The surface tension between the two liquids (for bubbles: between the fluid and the gas) can then be derived from the shape of the drop at this equilibrium point. A device used for such measurements is called a “spinning drop tensiometer”. The spinning drop method is usually preferred for the accurate measurements of surface tensions below 10 −2 mN/m. It refers to either using the fluids with low interfacial tension or working at very high angular velocities. This method is widely used in many different applications such as measuring the interfacial tension of polymer blends and copolymers.

The spinning drop method or rotating drop method is one of the methods used to measure interfacial tension. Measurements are carried out in a rotating horizontal tube which contains a dense fluid. A drop of a less dense liquid or a gas bubble is placed inside the fluid. Since the rotation of the horizontal tube creates a centrifugal force towards the tube walls, the liquid drop will start to deform into an elongated shape; this elongation stops when the interfacial tension and centrifugal forces are balanced. The surface tension between the two liquids (for bubbles: between the fluid and the gas) can then be derived from the shape of the drop at this equilibrium point. A device used for such measurements is called a “spinning drop tensiometer”. The spinning drop method is usually preferred for the accurate measurements of surface tensions below 10 −2 mN/m. It refers to either using the fluids with low interfacial tension or working at very high angular velocities. This method is widely used in many different applications such as measuring the interfacial tension of polymer blends and copolymers. E=E_k +\gamma_s The kinetic energy of a cylinder of length L and radius R rotating about its central axis is given by E_k=\frac{1}{2}I\omega^2=\frac{1}{4}mR^2\omega^2 in which I=\frac{1}{2}mR^2 is the moment of inertia of a cylinder rotating about its central axis and ω is its angular velocity. The surface energy of the droplet is given by \gamma_s=2\pi LR\sigma=\frac{2V}{R}\sigma in which V is the constant volume of the droplet and σ is the interfacial tension. Then the total mechanical energy of the droplet is E=E_k +\gamma_s=\frac{1}{4}\Delta\rho VR^2\omega^2+\frac{2V}{R}\sigma in which Δρ is the difference between the densities of the droplet and of the surrounding fluid. At mechanical equilibrium, the mechanical energy is minimized, and thus \frac{dE}{dR}=0=\frac{1}{2}\Delta\rho VR\omega^2-\frac{2V}{R^2}\sigma Substituting in V=\pi LR^2 for a cylinder and then solving this relation for interfacial tension yields \sigma=\frac{\Delta\rho\omega^2}{4}R^3 This equation is known as Vonnegut’s expression. Interfacial tension of any liquid that gives a shape very close to a cylinder at steady state, can be estimated using this equation. The straight cylindrical shape will always develop for sufficiently high ω; this typically happens for L/R > 4. Once this shape has developed, further increasing ω will decrease R while increasing L keeping LR 2 fixed to meet conservation of volume.

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1309381697 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot spinning-drop-method-852051-fc369e42337f94e1 · hash fc369e42337f94e10b0b0fb1c9b367726456bbe4b212b0df03607036e0884b36 · captured 1756919458.0 · version history

Cite this page as: encyclopegia.org, “Spinning drop method”, snapshot spinning-drop-method-852051-fc369e42337f94e1. https://encyclopegia.org/a/spinning-drop-method

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.