Lesson plan
Split-phase electric power
"split-phase" secondary. On the three secondary terminals, the center tap is grounded with a short strap to the transformer case. A split-phase or single-phase three-wire system is a form of single-phase electric power distribution. It is the alternating current (AC) equivalent of the original three-wire DC system developed by the Edison Machine Works. The main advantage of split-phase distribution is that, for a given power capacity, it requires less conductor material than a two-wire single-phase system. Split-phase distribution is widely used in North America for residential and light commercial service. A typical installation supplies two 120 V AC lines that are 180 degrees out of phase with each other (relative to the neutral), along with a shared neutral conductor. The neutral is connected to ground at the transformer's center tap. In North America, standard household circuits for lighting and small appliances are connected between one line and the neutral, providing 120 V. Higher-demand appliances such as ovens, dryers, or water heaters are powered by 240 V circuits, connected between the two 120 V lines. These 240 V loads are either hard-wired or use outlets designed to be non-interchangeable with 120 V outlets. Split-phase systems are also used in some specialized applications to reduce the risk of electric shock or to minimize electromagnetic noise.
Article summary
"split-phase" secondary. On the three secondary terminals, the center tap is grounded with a short strap to the transformer case. A split-phase or single-phase three-wire system is a form of single-phase electric power distribution. It is the alternating current (AC) equivalent of the original three-wire DC system developed by the Edison Machine Works. The main advantage of split-phase distribution is that, for a given power capacity, it requires less conductor material than a two-wire single-phase system. Split-phase distribution is widely used in North America for residential and light commercial service. A typical installation supplies two 120 V AC lines that are 180 degrees out of phase with each other (relative to the neutral), along with a shared neutral conductor. The neutral is connected to ground at the transformer's center tap. In North America, standard household circuits for lighting and small appliances are connected between one line and the neutral, providing 120 V. Higher-demand appliances such as ovens, dryers, or water heaters are powered by 240 V circuits, connected between the two 120 V lines. These 240 V loads are either hard-wired or use outlets designed to be non-interchangeable with 120 V outlets. Split-phase systems are also used in some specialized applications to reduce the risk of electric shock or to minimize electromagnetic noise.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.