Lesson plan

Springing

In seamanship, springing refers to global (vertical) vibrations in the girders of the watercraft's hull induced by continuous wave loading. When the vibrations occur as a result of an impulsive wave loading, for example, a wave slam at the bow (bow-slamming) or stern (stern-slamming), the phenomenon is denoted by the term whipping. Springing is a resonance phenomenon, and it can occur when the natural frequency of the 2-node vertical vibration of the ship equals the wave encounter frequency or a multiple therefrom. Whipping is a transient phenomenon of the same hull girder vibrations due to excessive impulsive loading in the bow or stern of the vessel. The 2-node natural frequency is the lowest, and thereby the most dominant resonant mode leading to hull girder stress variations, though in theory higher vibration modes will be excited as well. Springing-induced vibrations can already be present in low or moderate sea states when resonant conditions occur between wavelengths present in the wave spectrum and the hull girder natural modes, while whipping typically requires rough sea states before the very local occurring slamming impact has sufficient energy to excite the global structural vibration modes. The hydrodynamic theory of springing is not yet fully understood due to the complex description of the surface waves and structure interaction.…

Back to article

Article summary

In seamanship, springing refers to global (vertical) vibrations in the girders of the watercraft's hull induced by continuous wave loading. When the vibrations occur as a result of an impulsive wave loading, for example, a wave slam at the bow (bow-slamming) or stern (stern-slamming), the phenomenon is denoted by the term whipping. Springing is a resonance phenomenon, and it can occur when the natural frequency of the 2-node vertical vibration of the ship equals the wave encounter frequency or a multiple therefrom. Whipping is a transient phenomenon of the same hull girder vibrations due to excessive impulsive loading in the bow or stern of the vessel. The 2-node natural frequency is the lowest, and thereby the most dominant resonant mode leading to hull girder stress variations, though in theory higher vibration modes will be excited as well. Springing-induced vibrations can already be present in low or moderate sea states when resonant conditions occur between wavelengths present in the wave spectrum and the hull girder natural modes, while whipping typically requires rough sea states before the very local occurring slamming impact has sufficient energy to excite the global structural vibration modes. The hydrodynamic theory of springing is not yet fully understood due to the complex description of the surface waves and structure interaction.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.