Squeeze flow
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Squeeze flow (also called squeezing flow, squeezing film flow, or squeeze flow theory) is a type of flow in which a material is pressed out or deformed between two parallel plates or objects. First explored in 1874 by Josef Stefan, squeeze flow describes the outward movement of a droplet of material, its area of contact with the plate surfaces, and the effects of internal and external factors such as temperature, viscoelasticity, and heterogeneity of the material. Several squeeze flow models exist to describe Newtonian and non-Newtonian fluids undergoing squeeze flow under various geometries and conditions. Numerous applications across scientific and engineering disciplines including rheometry, welding engineering, and materials science provide examples of squeeze flow in practical use.
Squeeze flow (also called squeezing flow, squeezing film flow, or squeeze flow theory) is a type of flow in which a material is pressed out or deformed between two parallel plates or objects. First explored in 1874 by Josef Stefan, squeeze flow describes the outward movement of a droplet of material, its area of contact with the plate surfaces, and the effects of internal and external factors such as temperature, viscoelasticity, and heterogeneity of the material. Several squeeze flow models exist to describe Newtonian and non-Newtonian fluids undergoing squeeze flow under various geometries and conditions. Numerous applications across scientific and engineering disciplines including rheometry, welding engineering, and materials science provide examples of squeeze flow in practical use. F=-\frac{4*L^3*\eta*W}{h^3}{dh \over dt} Where F is the applied squeezing force, 2L is the initial length of the droplet, \eta is the fluid viscosity, W is the width of the assumed rectangular plate, 2h is the final height of the droplet, and {dh \over dt} is the change in droplet height over time. To simplify most calculations, the applied force is assumed to be constant. \frac{h_0}{h}=\left (1+\frac{5*F*t*h_0^2}{4*\eta*W*L_0^3}\right )^{1/5} Where 2h_0 is the initial height of the droplet, 2h is the final height of the droplet, F is the applied squeezing force, t is the squeezing time, \eta is the fluid viscosity, W is the width of the assumed rectangular plate, and 2L_0 is the initial length of the droplet. Based on conservation of mass calculations, the droplet width is inversely proportional to droplet height; as the width increases, the height decreases in response to squeezing forces. \frac{h_0}{h}=\left (1+\frac{16*F*t*h_0^2}{3*\pi*\eta*R^4}\right )^{1/2} R is the radius of the circular plate. \frac{h_0}{h}=\left (1+\frac{F*t*h_0^2}{2*\mu*W*L^3}\right )^{1/2} These calculations assume a melt layer that has a length much larger than the sample width and thickness. \frac{h_0}{h}=\left ( 1+t*(\frac{2n+3}{4n+2})(\frac{(4*h_0*L_0)^{n+1}*F*(n+2)}{(2*L_0)^{2n+3}*W*m})^{1/n}\right )^{n/2n+3} Where m (or K ) is the flow consistency index and n is the dimensionless flow behavior index. m=m_0*exp\left ( \frac{-E_a}{R*T} \right ) Where m is the flow consistency index, m_0 is the initial flow consistency index, E_a is the activation energy, R is the universal gas constant, and T is the absolute temperature. During experimentation to determine the accuracy of the power law fluid model, observations showed that modeling slow squeeze flow generated inaccurate power law constants ( m and n ) using a standard viscometer, and fast squeeze flow demonstrated that polymers may exhibit better lubrication than current constitutive models will predict. The current empirical model for power law fluids is relatively accurate for modeling inelastic flows, but certain kinematic flow assumptions and incomplete understanding of polymeric lubrication properties tend to provide inaccurate modeling of power law fluids. \tau = \begin{cases} \eta_2*{du \over dy}+\tau_1, & \text{if }\tau\geq\tau_1 \\ \eta_1*{du \over dy}, & \text{if }\tau Where \eta_2 is the known viscosity of the Bingham fluid, \eta_1 is the "paradoxical" viscosity of the solid-like state, and \tau_1 is the biviscosity region stress. To determine this new stress: \tau_0=\tau_1(1-\epsilon) Where \tau_0 is the yield stress and \epsilon=\frac{\eta_2}{\eta_1} is the dimensionless viscosity ratio. If \epsilon=1 , the fluid exhibits Newtonian behavior; as \epsilon\rightarrow0 , the Bingham model applies.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1346680424 under CC BY-SA 4.0; modifications have been made.