Lesson plan
Squegging
Squegging is a radio engineering term. It is a contraction of self-quenching. A squegging or self-blocking oscillator produces an intermittent or changing output signal. Squegging is an oscillation that builds up and dies down with a much longer time constant than the fundamental frequency of the oscillation. For instance, in a radio system where the carrier frequency might be in the millions of cycles per second, squegging might occur at a frequency of hundreds or thousands of times a second. The effect was initially seen in early radio receivers, where it would cause the output to periodically drop to zero, or alternately, create a peak that would produce a periodic "pop" sound in the headphones or loudspeaker. In the later case, it was often known as "motorboating". It was generally caused by the use of an oscillator between the amplifier stages, which had some non-linear response which would cause the amplification to rise and fall over a time period much longer than the radio frequency signal. This could generally be corrected by changing some of the components to ones with slightly different values. The effect was later used deliberately to produce certain types of output.…
Article summary
Squegging is a radio engineering term. It is a contraction of self-quenching. A squegging or self-blocking oscillator produces an intermittent or changing output signal. Squegging is an oscillation that builds up and dies down with a much longer time constant than the fundamental frequency of the oscillation. For instance, in a radio system where the carrier frequency might be in the millions of cycles per second, squegging might occur at a frequency of hundreds or thousands of times a second. The effect was initially seen in early radio receivers, where it would cause the output to periodically drop to zero, or alternately, create a peak that would produce a periodic "pop" sound in the headphones or loudspeaker. In the later case, it was often known as "motorboating". It was generally caused by the use of an oscillator between the amplifier stages, which had some non-linear response which would cause the amplification to rise and fall over a time period much longer than the radio frequency signal. This could generally be corrected by changing some of the components to ones with slightly different values. The effect was later used deliberately to produce certain types of output.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.