ST3000DM001
The ST3000DM001 is a hard disk drive released by Seagate Technology in 2011 as part of the Seagate Barracuda series.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The ST3000DM001 is a hard disk drive released by Seagate Technology in 20111 as part of the Seagate Barracuda series. It has a capacity of 3 terabytes (TB) and a spindle speed of 7200 RPM. This particular drive model was reported to have unusually high failure rates, due to a parking ramp that was made from different materials.
The failure rates were approximately 5.7 times higher in comparison to other 3 TB drives, for which Seagate faced a class-action lawsuit.
Specifications
made on 25 May 2017 for Apple (as shown by the black label) The ST3000DM001 uses three 1 TB platters, compared to five platters in the previous generation Barracuda XT drive, and has a spindle speed of 7200 RPM. The drive uses a 40 nm dual-core LSI controller and 64 MB of DDR2-800 as the DRAM cache. As part of the release of its 1 TB-platter drives, Seagate announced that it was phasing out its Barracuda Green line of 5900 RPM hard drives.
Initial reception
hard drives in retail packaging|upright=1 Anand Lal Shimpi of AnandTech noted that the ST3000DM001 is "a bit faster in sequential performance than the old Barracuda XT, at lower power consumption" and that "Seagate appears to have optimized the drive's behavior for lower power rather than peak performance". He said he was "personally OK" with the lower performance under heavy loads as long as the drive is used together with a solid-state drive (SSD) in a system.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378344017 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “ST3000DM001” release date (×1) · confidence 0.95 revision URL