Lesson plan
Standard linear solid Q model
In seismology, the standard linear solid Q model (SLS Q model) for attenuation and dispersion, also known as the Zener Q model, is one of many Q models that gives a definition of how the earth responds to seismic waves. When a plane wave propagates through a homogeneous viscoelastic medium, the effects of amplitude attenuation and velocity dispersion may be combined conveniently into a single dimensionless parameter, Q, the medium-quality factor. Transmission losses may occur due to friction or fluid movement, and whatever the physical mechanism, they can be conveniently described with an empirical formulation where elastic moduli and propagation velocity are complex functions of frequency. Ursin and Toverud compared different Q models including the above model (SLS-model). In order to compare the different models they considered plane-wave propagation in a homogeneous viscoelastic medium. They used the Kolsky-Futterman model as a reference and studied the SLS model. This model was compared with the Kolsky-Futterman model. The Kolsky-Futterman model was first described in the article ‘Dispersive body waves’ by Futterman (1962).
Article summary
In seismology, the standard linear solid Q model (SLS Q model) for attenuation and dispersion, also known as the Zener Q model, is one of many Q models that gives a definition of how the earth responds to seismic waves. When a plane wave propagates through a homogeneous viscoelastic medium, the effects of amplitude attenuation and velocity dispersion may be combined conveniently into a single dimensionless parameter, Q, the medium-quality factor. Transmission losses may occur due to friction or fluid movement, and whatever the physical mechanism, they can be conveniently described with an empirical formulation where elastic moduli and propagation velocity are complex functions of frequency. Ursin and Toverud compared different Q models including the above model (SLS-model). In order to compare the different models they considered plane-wave propagation in a homogeneous viscoelastic medium. They used the Kolsky-Futterman model as a reference and studied the SLS model. This model was compared with the Kolsky-Futterman model. The Kolsky-Futterman model was first described in the article ‘Dispersive body waves’ by Futterman (1962).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.