Standard SC engine

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Standard SC engine is a cast-iron overhead valve straight-four engine designed and initially produced by Standard Triumph. Over its production life displacement grew from an initial size of just over 800 cc to nearly 1500 cc. Introduced in the Standard Eight in 1953, it would eventually be used in a wide range of vehicles from Standard, Triumph, and MG.

The Standard SC engine is a cast-iron overhead valve straight-four engine designed and initially produced by Standard Triumph. Over its production life displacement grew from an initial size of just over 800 cc to nearly 1500 cc. Introduced in the Standard Eight in 1953, it would eventually be used in a wide range of vehicles from Standard, Triumph, and MG.

Design

Design of the engine was headed by David Eley, a long-time Standard employee. The engine had a cast-iron block and cylinder head, and a pressed-steel sump. Spark-plugs and camshaft were on the left side of the engine, while the inlet and exhaust manifolds were on the right. The camshaft, which drove the distributor and oil pump through a spur gear, was itself chain-driven off the nose of the crankshaft, with the drive covered by a pressed-steel cover. The cylinder head had four inlet and four outlet ports, in contrast to some of its competitors who had some ports siamesed. The crankshaft was carried in three main bearings. Crankshaft and connecting rods were steel, while the pistons were light alloy. The ancillaries were mounted on the left side of the engine, while the water pump and thermostat were in a separate casting attached to the front of the engine.

References

External links

Text derived from https://en.wikipedia.org/w/index.php?oldid=1348832871 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.