Standard state

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

, initially intended as a load line for ships, as labelled by the Lloyd's Register The standard state of a material (pure substance, mixture or solution) is a reference point used to calculate its properties under different conditions. A degree sign (°) or a superscript 𜻰 symbol ( 𜻰 ) is used to designate a thermodynamic quantity in the standard state, such as change in enthalpy (ΔH°), change in entropy (ΔS°), or change in Gibbs free energy (ΔG°).

Impact

The degree symbol has become widespread, although the Plimsoll symbol is recommended in standards; see discussion about typesetting below. In principle, the choice of standard state is arbitrary, although the International Union of Pure and Applied Chemistry (IUPAC) recommends a conventional set of standard states for general use. The standard state should not be confused with standard temperature and pressure (STP) for gases, nor with the standard solutions used in analytical chemistry.

STP is commonly used for calculations involving gases that approximate an ideal gas, whereas standard state conditions are used for thermodynamic calculations. For a given material or substance, the standard state is the reference state for the material's thermodynamic state properties, such as enthalpy, entropy, Gibbs free energy, and for many other material standards.…

, initially intended as a load line for ships, as labelled by the Lloyd's Register The standard state of a material (pure substance, mixture or solution) is a reference point used to calculate its properties under different conditions. A degree sign (°) or a superscript 𜻰 symbol ( 𜻰 ) is used to designate a thermodynamic quantity in the standard state, such as change in enthalpy (ΔH°), change in entropy (ΔS°), or change in Gibbs free energy (ΔG°).

The degree symbol has become widespread, although the Plimsoll symbol is recommended in standards; see discussion about typesetting below. In principle, the choice of standard state is arbitrary, although the International Union of Pure and Applied Chemistry (IUPAC) recommends a conventional set of standard states for general use. The standard state should not be confused with standard temperature and pressure (STP) for gases, nor with the standard solutions used in analytical chemistry.

STP is commonly used for calculations involving gases that approximate an ideal gas, whereas standard state conditions are used for thermodynamic calculations. For a given material or substance, the standard state is the reference state for the material's thermodynamic state properties, such as enthalpy, entropy, Gibbs free energy, and for many other material standards.

The standard enthalpy change of formation for an element in its standard state is zero, and this convention allows a wide range of other thermodynamic quantities to be calculated and tabulated. The standard state of a substance does not need to exist in nature: for example, it is possible to calculate values for steam at 298.15 K and , although steam does not exist (as a gas) under these conditions. The advantage of this practice is that tables of thermodynamic properties prepared in this way are self-consistent.

The standard state for liquids and solids is simply the state of the pure substance subjected to a total pressure of (or 1 bar). For most elements, the reference point of Δ f H ⦵  = 0 is defined for the most stable allotrope of the element, such as graphite in the case of carbon, and the β-phase (white tin) in the case of tin. An exception is white phosphorus, the most common allotrope of phosphorus, which is defined as the standard state despite being only metastable.

This is because the thermodynamically stable black allotrope is difficult to prepare in pure form.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1375101146 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.