Lesson plan
Standard Test and Programming Language
JAM / STAPL ("Standard Test and Programming Language") is an Altera-developed standard for JTAG in-circuit programming of programmable logic devices (PLDs). It is defined by JEDEC standard JESD-71. STAPL defines a standard .jam file format which supports in-system programmability or configuration of programmable devices. A JTAG device programmer implements a JAM player which reads the file as a set of instructions directing it to program a PLD. The standard is supported by multiple PLD and device programmer manufacturers.
Article summary
JAM / STAPL ("Standard Test and Programming Language") is an Altera-developed standard for JTAG in-circuit programming of programmable logic devices (PLDs). It is defined by JEDEC standard JESD-71. STAPL defines a standard .jam file format which supports in-system programmability or configuration of programmable devices. A JTAG device programmer implements a JAM player which reads the file as a set of instructions directing it to program a PLD. The standard is supported by multiple PLD and device programmer manufacturers.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.