Standardized uptake value

Uses your system voice; voice and rate in settings.

Snapshot

≈ 5 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

[[File:3D-PET-SUV.jpg|thumb|3-dimensional [ 18 F]FDG-PET image with 3D ROI generated by a threshold based algorithm. The blue dot in the MIP image bottom right marks the maximum SUV within the ROI.

The standardized uptake value (SUV) is a nuclear medicine term, used in positron emission tomography (PET) as well as in modern calibrated single-photon emission computed tomography (SPECT) imaging for a semiquantitative analysis. Its use is particularly common in the analysis of [[fluorodeoxyglucose|[ 18 F]fluorodeoxyglucose ( ) images of cancer patients.

It can also be used with other PET agents especially when no arterial input function is available for more detailed pharmacokinetic modeling. Otherwise measures like the fractional uptake rate (FUR) or parameters from more advanced pharmacokinetic modeling may be preferable.

Abnormal SUV values indicate variations in metabolic activity and thus can provide identifying areas of interest, like tumors or regions of inflammation. The SUV is the ratio of the image-derived radioactivity concentration c img and the whole body concentration of the injected radioactivity c inj , SUV = \frac {c_{img}} {c_{inj}}.

[[File:3D-PET-SUV.jpg|thumb|3-dimensional [ 18 F]FDG-PET image with 3D ROI generated by a threshold based algorithm. The blue dot in the MIP image bottom right marks the maximum SUV within the ROI.]]

The standardized uptake value (SUV) is a nuclear medicine term, used in positron emission tomography (PET) as well as in modern calibrated single-photon emission computed tomography (SPECT) imaging for a semiquantitative analysis. Its use is particularly common in the analysis of [[fluorodeoxyglucose|[ 18 F]fluorodeoxyglucose]] ( ) images of cancer patients.

It can also be used with other PET agents especially when no arterial input function is available for more detailed pharmacokinetic modeling. Otherwise measures like the fractional uptake rate (FUR) or parameters from more advanced pharmacokinetic modeling may be preferable.

Abnormal SUV values indicate variations in metabolic activity and thus can provide identifying areas of interest, like tumors or regions of inflammation. The SUV is the ratio of the image-derived radioactivity concentration c img and the whole body concentration of the injected radioactivity c inj , SUV = \frac {c_{img}} {c_{inj}}.

The c inj value is calculated as ratio of two independent measurements: the injected radioactivity (injected dose, ID) and the body weight (BW) of the subject. The ID can be estimated e.g. as difference in the radioactivity of the syringe before and after injection, if deemed necessary with correction for physical decay between each of those measurements and the time of injection.

Conventionally the time of injection is t=0. This reference concentration represents the hypothetical case of an even distribution of the injected radioactivity across the whole body.

Measured SUV values in particular parts of the body thus quantify the deviation from this hypothetical even radioactivity distribution: SUV > 1 indicates radioactivity accumulation in that region above the hypothetical even radioactivity distribution. The injection of radioactivity is often followed by a waiting time interval and then a time span during which the PET image data are acquired.

After image reconstruction, the image c img (t) data need to be decay corrected to the injection time point t=0. The time point t may be the image acquisition start time, or in case of a long acquisition duration e.g. the midpoint of the PET image acquisition may be more appropriate.

This decay correction needs to be done for each image in case of a series of images acquired after a single injection ("dynamic imaging"). SUV(t) = \frac {c_{img}(t)} {ID / BW} with (1) the radioactivity measured from an image acquired at (or around) the time t, decay corrected to t=0 and expressed as volume concentration (e.g. MBq/mL), (2) the injected dose ID at t=0 (e.g. in MBq), and (3) the body weight BW (near the time of image acquisition) implicitly converted into the body volume assuming an average mass density of 1 g/mL.

A related measure more frequently used in preclinical PET and SPECT is the concentration in units of % ID/mL (percentage of the injected dose per mL of tissue) for biodistribution analysis. When obtained from radionuclear images, this is equal to \% ID/mL(t) = \frac {c_{img}(t)} {ID} \cdot 100\% .

In other words, SUV can be interpreted as the % ID/mL normalized to (here, multiplied by) the body weight (or body volume) and expressed as fraction rather than percentage. {\mathit{SUVR}} = \frac {\mathit{SUV_{target}}} {\mathit{SUV_{reference}}} = \frac {\mathit{c_{img,target}}} {\mathit{c_{img,reference}}} .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1360738844 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.