Lesson plan
Starter (engine)
which controls power to the motor and engages the drive pinion with the engine's flywheel. A starter (also self-starter, cranking motor, or starter motor) is an apparatus installed in motor vehicles to rotate the crankshaft of an internal combustion engine so as to initiate the engine's combustion cycle. Starters can be electric, pneumatic, or hydraulic. The starter can also be another internal combustion engine in the case, for instance, of very large engines, or diesel engines in agricultural or excavation applications. Internal combustion engines are feedback systems, which, once started, rely on the inertia from each cycle to initiate the next cycle. In a four-stroke engine, the third stroke releases energy from the fuel, powering the fourth (exhaust) stroke and also the first two (intake, compression) strokes of the next cycle, as well as powering the engine's external load. To start the first cycle at the beginning of any particular session, the first two strokes must be powered in some other way than from the engine itself. The starter motor is used for this purpose and it is not required once the engine starts running and its feedback loop becomes self-sustaining. on its flywheel
Article summary
which controls power to the motor and engages the drive pinion with the engine's flywheel. A starter (also self-starter, cranking motor, or starter motor) is an apparatus installed in motor vehicles to rotate the crankshaft of an internal combustion engine so as to initiate the engine's combustion cycle. Starters can be electric, pneumatic, or hydraulic. The starter can also be another internal combustion engine in the case, for instance, of very large engines, or diesel engines in agricultural or excavation applications. Internal combustion engines are feedback systems, which, once started, rely on the inertia from each cycle to initiate the next cycle. In a four-stroke engine, the third stroke releases energy from the fuel, powering the fourth (exhaust) stroke and also the first two (intake, compression) strokes of the next cycle, as well as powering the engine's external load. To start the first cycle at the beginning of any particular session, the first two strokes must be powered in some other way than from the engine itself. The starter motor is used for this purpose and it is not required once the engine starts running and its feedback loop becomes self-sustaining. on its flywheel
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.