Lesson plan

Static induction transistor

The static induction transistor (SIT) is a type of field-effect transistor (FET) capable of high-speed and high-power operation, with low distortion and low noise. It is a vertical structure device with short multichannel. The device was originally known as a VFET, with V being short for vertical. Being a vertical device, the SIT structure offers advantages in obtaining higher breakdown voltages than a conventional FET. For the SIT, the breakdown voltage is not limited by the surface breakdown between gate and drain, allowing it to operate at a very high current and voltage. The SIT has a current-voltage characteristic similar to a vacuum tube triode and it was therefore used in high-end audio products, including power amplifiers from Sony in the second half of the 1970s and Yamaha from 1973-1980. The Sony n-channel SIT had the model number 2SK82 with its p-channel complement named 2SJ28.

Back to article

Article summary

The static induction transistor (SIT) is a type of field-effect transistor (FET) capable of high-speed and high-power operation, with low distortion and low noise. It is a vertical structure device with short multichannel. The device was originally known as a VFET, with V being short for vertical. Being a vertical device, the SIT structure offers advantages in obtaining higher breakdown voltages than a conventional FET. For the SIT, the breakdown voltage is not limited by the surface breakdown between gate and drain, allowing it to operate at a very high current and voltage. The SIT has a current-voltage characteristic similar to a vacuum tube triode and it was therefore used in high-end audio products, including power amplifiers from Sony in the second half of the 1970s and Yamaha from 1973-1980. The Sony n-channel SIT had the model number 2SK82 with its p-channel complement named 2SJ28.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.