Static timing analysis

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Static timing analysis (STA) is a simulation method of computing the expected timing of a synchronous digital circuit without requiring full circuit-simulation. High-performance integrated circuits have traditionally been characterized by the clock frequency at which they operate. Measuring the ability of a circuit to operate at the specified speed requires an ability to measure, during the design process, its delay at numerous steps. Moreover, delay calculation must be incorporated into the inner loop of timing optimizers at various phases of design, such as logic synthesis, layout (placement and routing), and in in-place optimizations performed late in the design cycle. While such timing measurements can theoretically be performed using a rigorous circuit simulation, such an approach is liable to be too slow to be practical. Static timing analysis plays a vital role in facilitating the fast and reasonably accurate measurement of circuit timing. The speedup comes from the use of simplified timing models and by mostly ignoring logical interactions in circuits. This has become a mainstay of design over the last few decades. One of the earliest descriptions of a static timing approach was based on the Program Evaluation and Review Technique (PERT), in 1966. More modern versions and algorithms appeared in the early 1980s.

Static timing analysis (STA) is a simulation method of computing the expected timing of a synchronous digital circuit without requiring full circuit-simulation. High-performance integrated circuits have traditionally been characterized by the clock frequency at which they operate. Measuring the ability of a circuit to operate at the specified speed requires an ability to measure, during the design process, its delay at numerous steps. Moreover, delay calculation must be incorporated into the inner loop of timing optimizers at various phases of design, such as logic synthesis, layout (placement and routing), and in in-place optimizations performed late in the design cycle. While such timing measurements can theoretically be performed using a rigorous circuit simulation, such an approach is liable to be too slow to be practical. Static timing analysis plays a vital role in facilitating the fast and reasonably accurate measurement of circuit timing. The speedup comes from the use of simplified timing models and by mostly ignoring logical interactions in circuits. This has become a mainstay of design over the last few decades. One of the earliest descriptions of a static timing approach was based on the Program Evaluation and Review Technique (PERT), in 1966. More modern versions and algorithms appeared in the early 1980s.

See also

Dynamic timing verification Electronic design automation Integrated circuit design Logic analyzer—for verification of STA Logic simulation Simulation Timing margin Worst-case execution time Signoff (electronic design automation)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1348444933 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

Extracted from the cited revision's reference blocks; absent citations are not invented.