Stay mouse

The nautical term "stay mouse" refers to an antiquated part of a sailing vessel 's standing rigging.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The nautical term "stay mouse" refers to an antiquated part of a sailing vessel 's standing rigging. On all sailing ships built before about the 19th century, the stays were of natural cords. These lines were looped around the top of each section of the wooden masts using a spliced loop or seized loop in their ends.

During the 16th century some riggers began to attach stays by splicing or seizing only a small loop into the end of the stay then passing the rope's tail around the mast and back through the small loop, like a slip-knot. To prevent this from slipping tightly around the mast when in use, a strong bulge was built into the standing part of the rope that could not fit through the small loop.

This bulge was called a mouse or stay mouse. As galvanized and stainless steel standing rigging replaced natural fibers, and steel and aluminum replaced wood for masts, these methods were no longer required. Classic boat and historic ship enthusiasts, along with model makers, continue to use and study these technologies.

References

Historic Ship Models: Stays 69 Description and some history Historic Ship Models: Stays 72 Detail drawings

Text derived from https://en.wikipedia.org/w/index.php?oldid=1348300572 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.