steam car
≈ 17 min read
Names in other languages
- Françaisvoiture à vapeur
- DeutschDampfauto
- Englishsteam car
- nnDampbil
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
(1912) A steam car is a car (automobile) propelled by a steam engine. A steam engine is an external combustion engine (ECE), whereas the gasoline and diesel engines that eventually became standard are internal combustion engines (ICE). ECEs have a lower thermal efficiency, but carbon monoxide production is more readily regulated.
The first experimental steam-powered cars were built in the 18th and 19th centuries, but it was not until after Richard Trevithick developed the use of high-pressure steam around 1800 that mobile steam engines became a practical proposition. By the 1850s there was a flurry of new steam car manufacturers.
Development was hampered by adverse legislation (the UK Locomotive Acts from the 1860s) as well as the rapid development of internal combustion engine technology in the 1900s, leading to the commercial demise of steam-powered vehicles. Relatively few remained in use after the Second World War. Many of these vehicles were acquired by enthusiasts for preservation.
The search for renewable energy sources has led to an occasional resurgence of interest in using steam technology to power road vehicles.
(1912) A steam car is a car (automobile) propelled by a steam engine. A steam engine is an external combustion engine (ECE), whereas the gasoline and diesel engines that eventually became standard are internal combustion engines (ICE). ECEs have a lower thermal efficiency, but carbon monoxide production is more readily regulated.
The first experimental steam-powered cars were built in the 18th and 19th centuries, but it was not until after Richard Trevithick developed the use of high-pressure steam around 1800 that mobile steam engines became a practical proposition. By the 1850s there was a flurry of new steam car manufacturers.
Development was hampered by adverse legislation (the UK Locomotive Acts from the 1860s) as well as the rapid development of internal combustion engine technology in the 1900s, leading to the commercial demise of steam-powered vehicles. Relatively few remained in use after the Second World War. Many of these vehicles were acquired by enthusiasts for preservation.
The search for renewable energy sources has led to an occasional resurgence of interest in using steam technology to power road vehicles.
Technology
While gasoline-powered ICE cars have an operational thermal efficiency of 15% to 30%, early automotive steam units were capable of only about half this efficiency. A significant benefit of the ECE is that the fuel burner can be configured for very low emissions of carbon monoxide, nitrogen oxides and unburned carbon in the exhaust, thus avoiding pollution.
The greatest technical challenges to the steam car have focused on its boiler. This represents much of the total mass of the vehicle, making the car heavy (an internal combustion-engined car requires no boiler), and requires careful attention from the driver, although even the cars of 1900 had considerable automation to manage this.
The single largest restriction is the need to supply feedwater to the boiler. This must either be carried and frequently replenished, or the car must also be fitted with a condenser, a further weight and inconvenience.
Steam-powered and electric cars outsold gasoline-powered cars in the United States prior to the invention of the electric starter, since internal combustion cars relied on a hand crank to start the engine, which was difficult and occasionally dangerous to use, as improper cranking could cause a backfire capable of breaking the arm of the operator. Electric cars were popular to some extent, but had a short range, and could not be charged on the road if the batteries ran low.
Once working pressure was attained, early steam cars could be instantly driven off with high acceleration, but they typically take several minutes to start from cold, plus time to get the burner to operating temperature. To overcome this, development has been directed toward flash boilers, which heat a much smaller quantity of water to get the vehicle started, and in the case of Doble cars, spark ignition kerosene burners.
The steam car does have advantages over internal combustion-powered cars, although most of these are now less important than in the early 20th century. The engine (excluding the boiler) is smaller and lighter than an internal combustion engine.
It is also better-suited to the speed and torque characteristics of the axle, thus avoiding the need for the heavy and complex transmission required for an internal combustion engine. The steam car is also quieter, even without a silencer.
1890s Commercial Manufacture
The 1890s were dominated by the formation of numerous car manufacturing companies. The internal combustion engine was in its infancy, whereas steam power was well established. Electric powered cars were becoming available but suffered from their inability to travel longer distances.
The majority of steam-powered car manufacturers from this period were from the United States. The more notable of these were Clark from 1895 to 1909, Locomobile from 1899 to 1903 when it switched to gasoline engines, and Stanley from 1897 to 1924.
As well as England and France, other countries also made attempts to manufacture steam cars: Cederholm of Sweden (1892), Malevez of Belgium (18981–1905), Schöche of Germany (1895), and Herbert Thomson of Australia (1896–1901). Of all the new manufacturers from the 1890s, only four continued to make steam cars after 1910.
They were Stanley (to 1924) and Waverley (to 1916) of the United States, Buard of France (to 1914), and Miesse of Belgium (to 1926).
Volume Production 1900 to 1913
There were a large number of new companies formed in the period from 1898 to 1905. Steam cars outnumbered other forms of propulsion among very early cars. In the U.S. in 1902, 485 of 909 new car registrations were steamers.
From 1899, Mobile had ten branches and 58 dealers across the U.S. The center of U.S. steamer production was New England, where 38 of the 84 manufacturers were located. Examples include White (Cleveland), Eclipse (Easton, Massachusetts), Cotta (Lanark, Illinois), Crouch (New Brighton, Pennsylvania), Hood (Danvers, Massachusetts, lasted just one month), Kidder (New Haven, Connecticut), Century (Syracuse, New York) and Skene (Lewiston, Maine, the company built everything but the tires).
By 1903, 43 of them were gone and by the end of 1910 of those companies that were started in the decade those left were White which lasted to 1911, Conrad which lasted to 1924, Turner-Miesse of England which lasted to 1913, Morriss to 1912, Doble to 1930, Rutherford to 1912, and Pearson-Cox to 1916. Assembly line mass production by Henry Ford dramatically reduced the cost of owning a conventional automobile, was also a strong factor in the steam car's demise as the Model T was both cheap and reliable.
Additionally, during the 'heyday' of steam cars, the internal combustion engine made steady gains in efficiency, matching and then surpassing the efficiency of a steam engine when the weight of a boiler is factored in.
Decline 1914 to 1939
With the introduction of the electric starter, the internal combustion engine became more popular than steam, but the internal combustion engine was not necessarily superior in performance, range, fuel economy and emissions. Some steam enthusiasts feel steam has not received its share of attention in the field of automobile efficiency.
Apart from Brooks of Canada, all the steam car manufacturers that commenced between 1916 and 1926 were in the United States. Endurance (1924–1925) was the last steam car manufacturer to commence operations. American/Derr continued retrofitting production cars of various makes with steam engines, and Doble was the last steam car manufacturer.
It ceased business in 1930.
Air Pollution, Fuel Crises, Resurgence and Enthusiasts
From the 1940s onward, various steam cars were constructed, usually by enthusiasts. Among those mentioned were Charles Keen, Cal Williams' 1950 Ford Conversion, Forrest R Detrick's 1957 Detrick S-101 prototype, and Harry Peterson's Stanley powered Peterson. The Detrick was constructed by Detrick, William H Mehrling, and Lee Gaeke who designed the engine based on a Stanley.
Charles Keen began constructing a steam car in 1940 with the intention of restarting steam car manufacturing. Keen's family had a long history of involvement with steam propulsion going back to his great-great-grandfather in the 1830s, who helped build early steam locomotives. His first car, a Plymouth Coupe, used a Stanley engine.
In 1948 and 1949, Keen employed Abner Doble to create a more powerful steam engine, a V4. He used this in La Dawri Victress S4 bodied sports car. Both these cars are still in existence.
Keen died in 19691 before completing a further car. His papers and patterns were destroyed at that time. In the 1950s, the only manufacturer to investigate steam cars was Paxton.
Abner Doble developed the Doble Ultimax engine for the Paxton Phoenix steam car, built by the Paxton Engineering Division of McCulloch Motors Corporation, Los Angeles. The engine's sustained maximum power was . A Ford Coupe was used as a test-bed for the engine.
The project was eventually dropped in 1954. In 1957, Williams Engine Company Incorporated of Ambler began offering steam engine conversions for existing production cars. When air pollution became a significant issue for California in the mid-1960s the state encouraged investigation into the use of steam-powered cars.
The fuel crises of the early 1970s prompted further work. None of this resulted in renewed steam car manufacturing. Steam cars remain the domain of enthusiasts, occasional experimentation by manufacturers, and those wishing to establish steam-powered land speed records.
Impact of Californian legislation
In 1967, California established the California Air Resources Board and began to implement legislation to dramatically reduce exhaust emissions. This prompted renewed interest in alternative fuels for motor vehicles and a resurgence of interest in steam-powered cars in the state.
The idea for having patrol cars fitted with steam engines stemmed from an informal meeting in March 1968 of members of the California Assembly Transportation Committee. In the discussion, Karsten Vieg, a lawyer attached to the committee, suggested that six cars be fitted with steam engines for testing by California District Police Chiefs.
A bill was passed by the legislature to fund the trial. In 1969, the California Highway Patrol initiated the project under Inspector David S. Luethje to investigate the feasibility of using steam engined cars.
Initially General Motors had agreed to pay a selected vendor $20,000 ($ in dollars ) toward the cost of developing a Rankine cycle engine, and up to $100,000 ($ in dollars ) for outfitting six Oldsmobile Delmont 88s as operational patrol vehicles. This deal fell through because the engine manufacturers rejected GM's offer.
The plan was revised and two 1969 Dodge Polaras were to be retrofitted with steam engines for testing. One car was to be modified by Don Johnson of Thermodynamic Systems Inc. and the other by industrialist William P. Lear's Lear Motors Incorporated.
At the time, the California State Legislature was introducing strict pollution control regulations for automobiles and the Chair of the Assembly Transportation Committee, John Francis Foran, was supportive of the idea. The committee also was proposing to test four steam-powered buses in the San Francisco Bay Area that year.
Instead of a Polara, Thermodynamic Systems (later called General Steam Corp), was given a late-model Oldsmobile Delmont 88. Lear was given a Polara but it does not appear to have been built. Both firms were given 6 months to complete their projects with Lear's being due for completion on August 1, 1969.
Neither car had been completed by the due date and in November 1969, Lear was reported as saying the car would be ready in 3 months. Lear's only known retrofit was a Chevrolet Monte Carlo unrelated to the project. As for the project, it seems to have never been completed, with Lear pulling out by December.
In 1969, the National Air Pollution Control Administration announced a competition for a contract to design a practical passenger-car steam engine. Five firms entered.
They were the consortium of Planning Research Corporation and STP Corporation, Battelle Memorial Institute, Columbus, Ohio, Continental Motors Corporation, Detroit, Vought Aeronautical Division of Ling-Temco-Vought, Dallas and Thermo Electron Corporation, Waltham, Massachusetts. General Motors introduced two experimental steam-powered cars in 1969.
One was the SE 124 based on a converted Chevrolet Chevelle and the other was designated SE 101 based on the Pontiac Grand Prix. The SE 124 had its standard gasoline engine replaced with a 50 hp Besler steam engine V4, using the 1920 Doble patents, the SE 101 was fitted with a 160 hp steam engine developed by GM Engineering. Power was transferred via a Toric automatic gearbox.
The results was disappointing. The steam engine was heavy and weighted 300 kg more than a standard V8 and gave about half the power. In October 1969, the Massachusetts Institute of Technology and the California Institute of Technology put out a challenge for a race August 1970 from Cambridge, Massachusetts to Pasadena, California for any college that wanted to participate in.
The race was open for electric, steam, turbine power, and internal combustion engines: liquid-fueled, gaseous-fueled engines, and hybrids. Two steam-powered cars entered the race. University of California, San Diego's modified AMC Javelin and Worcester Polytechnic Institute's converted 1970 Chevrolet Chevelle called the tea kettle.
Both dropped out on the second day of the race. The California Assembly passed legislation in 1972 to contract two companies to develop steam-powered cars. They were Aerojet Liquid Rocket Company of Sacramento and Steam Power Systems of San Diego.
Aerojet installed a steam turbine into a Chevrolet Vega, while Steam Power Systems built the Dutcher, a car named after the company's founder, Cornelius Dutcher. Both cars were tested by 1974 but neither car went into production. The Dutcher is on display at the Petersen Automotive Museum in Los Angeles.
Indy Cars
Both Johnson and Lear had contemplated constructing steam-powered cars for the Indianapolis 500, Johnson first in the early 1960s when with Controlled Steam Dynamics and in 1968 with Thermodynamic Systems and Lear in 1969. A third steam racing car was contemplated by a consortium of Planning Research Corporation and Andy Granatelli of STP Corporation.
Lear proceeded with the idea and constructed a car, but ran out of funds while trying to develop the engine. The car is thought to be at the National Automobile and Truck Museum of the United States in Auburn, Indiana. Johnson was also noted as working on a steam-powered helicopter.
William D Thompson, 69-year-old retired San Diego automotive engineer, also announced he planned to enter a steam-powered race car. Thompson was working on a $35,000 ($ in dollars ) steam-powered luxury car and he intended to use the car's engine in the race car. He had claimed that he had almost 250 orders for his cars.
By comparison, Rolls-Royces cost about $17,000 ($ in dollars ) at that time.
Donald Healey Steam Car
With Lear pulling out of attempting to make a steam car, Donald Healey decided to make a basic steam car technology more in line with Stanley or Doble and aimed at enthusiasts. He planned to have the car in production by 1971.
Ted Pritchard's Falcon Steam Car
Edward Pritchard created a steam-powered 1963 model Ford Falcon in 1972. It was evaluated by the Australian Federal Government and was also taken to the United States for promotional purposes.
Saab Steam Car and Ranotor
As a result of the 1973 oil crisis, SAAB started a project in 1974 codenamed ULF (short for utan luftföroreningar, Swedish for Without Air Pollution) headed by Dr. Ove Platell which made a prototype steam-powered car. The engine used an electronically controlled 28-pound multi-parallel-circuit steam generator with 1-millimeter-bore tubing and firing rate which was intended to produce of continuous power, and was about the same size as a standard car battery.
Lengthy start-up times were avoided by using air compressed and stored when the car was running to power the car upon starting until adequate steam pressure was built up. The engine used a conical rotary valve made from pure boron nitride. To conserve water, a hermetically sealed water system was used.
The project was cancelled and the project engineer, Ove Platell, started a company named Ranotor, with his son Peter Platell to continue its development. Ranotor is developing a steam hybrid that uses the exhaust heat from an ordinary petrol engine to power a small steam engine, with the aim of reducing fuel consumption by 20%.
In 2008, truck manufacturers Scania and Volvo were said to be interested in the project.
Pelland Steamer
In 1974, the British designer Peter Pellandine produced the first Pelland Steamer for a contract with the South Australian Government. It had a fibreglass monocoque chassis (based on the internal combustion-engined Pelland Sports) and used a parallel twin cylinder double acting compound engine. It has been preserved at the National Motor Museum at Birdwood, South Australia.
In 1979, the Pelland Mk II Steam Car was built, this time by Pelland Engineering in the UK. It had a three-cylinder double-acting engine in a 'broad-arrow' configuration, mounted in a tubular steel chassis with a Kevlar body, giving a gross weight of just . Uncomplicated and robust, the steam engine was claimed to give trouble-free, efficient performance.
It had huge torque ( ) at zero engine revs, and could accelerate from in under 8 seconds . Pellandine made several attempts to break the land speed record for steam power, but was thwarted by technical issues. Pellandine moved back to Australia in early 1991 where he continued to develop the Steamer in Tasmania.
The latest version is the Mark IV.
Enginion Steamcell
From 1996, a R&D subsidiary of the Volkswagen group called Enginion AG was developing a system called ZEE (Zero Emissions Engine). It produced steam almost instantly without an open flame, and took 30 seconds to reach maximum power from a cold start. Their third prototype, EZEE03, was a three-cylinder unit meant to fit in a Škoda Fabia automobile.
The EZEE03 was described as having a "two-stroke" (i.e. single-acting) engine of displacement, producing up to ( ). Exhaust emissions were said to be far below the SULEV standard. It had an oilless engine with ceramic cylinder linings using steam instead of oil as a lubricant.
However, Enginion found that the market was not ready for steam cars, so they opted instead to develop the Steamcell power generator/heating system based on similar technology. Overview on an attempt to break the existing 101-year-old Steam car world land speed record One day Steam Car conversion, where two teams in the UK TV series Scrapheap Challenge (Junkyard Wars in the U.S.) converted junk cars into coal-fired steam cars.
Steam 101
Text derived from https://en.wikipedia.org/w/index.php?oldid=1365960708 under CC BY-SA 4.0; modifications have been made.
References
- ↩Wikipedia “steam car” date of death (×2) · confidence 0.95 revision URL