Lesson plan
stellarator
experiment: A series of magnet coils (blue) surrounds the plasma (yellow). A magnetic field line is highlighted in green on the yellow plasma surface. in Greifswald, Germany. Coils are prepared for the experimental stellarator. stellarator A stellarator is a fusion power device that confines plasma using external magnets. It is one of many types of magnetic confinement fusion devices, and among the first to be invented. The name "stellarator" refers to stars, because fusion mostly occurs in stars such as the Sun. It is one of the earliest human-designed fusion power devices. The stellarator was invented by American scientist Lyman Spitzer in 1951. Much of its early development was carried out by Spitzer's team at what became the Princeton Plasma Physics Laboratory (PPPL). Spitzer's Model A began operation in 1953 and demonstrated plasma confinement. Larger models followed, but demonstrated poor performance, losing plasma at rates far worse than theoretical predictions. By the early 1960s, attention turned to fundamental theory. By the mid-1960s, Spitzer was convinced that the stellarator was matching the Bohm diffusion rate, which suggested it would never be a practical fusion device. The USSR's T-3 tokamak demonstrated a leap in performance in 1968. PPPL converted the Model C stellarator to the Symmetric Tokamak (ST) to confirm or deny its results. ST surpassed them.…
Article summary
experiment: A series of magnet coils (blue) surrounds the plasma (yellow). A magnetic field line is highlighted in green on the yellow plasma surface. in Greifswald, Germany. Coils are prepared for the experimental stellarator. stellarator A stellarator is a fusion power device that confines plasma using external magnets. It is one of many types of magnetic confinement fusion devices, and among the first to be invented. The name "stellarator" refers to stars, because fusion mostly occurs in stars such as the Sun. It is one of the earliest human-designed fusion power devices. The stellarator was invented by American scientist Lyman Spitzer in 1951. Much of its early development was carried out by Spitzer's team at what became the Princeton Plasma Physics Laboratory (PPPL). Spitzer's Model A began operation in 1953 and demonstrated plasma confinement. Larger models followed, but demonstrated poor performance, losing plasma at rates far worse than theoretical predictions. By the early 1960s, attention turned to fundamental theory. By the mid-1960s, Spitzer was convinced that the stellarator was matching the Bohm diffusion rate, which suggested it would never be a practical fusion device. The USSR's T-3 tokamak demonstrated a leap in performance in 1968. PPPL converted the Model C stellarator to the Symmetric Tokamak (ST) to confirm or deny its results. ST surpassed them.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.