Lesson plan
Stereo camera
A stereo camera is a type of camera with two or more lenses with a separate image sensor or film frame for each lens. This allows the camera to simulate human binocular vision, and therefore gives it the ability to capture three-dimensional images, a process known as stereo photography. Stereo cameras may be used for making stereoviews and 3D pictures for movies, or for range imaging. The distance between the lenses in a typical stereo camera (the intra-axial distance) is about the distance between one's eyes (known as the intra-ocular distance) and is about 6.35 cm, though a longer base line (greater inter-camera distance) produces more extreme 3-dimensionality. In the 1950s, stereo cameras gained some popularity with the Stereo Realist and similar cameras that employed 135 film to make stereo slides. 3D pictures following the theory behind stereo cameras can also be made more inexpensively by taking two pictures with the same camera, but moving the camera a few inches either left or right. If the image is edited so that each eye sees a different image, then the image will appear to be 3D. This method has problems with objects moving in the different views, though works well with still life. Stereo cameras are sometimes mounted in cars to detect the lane's width and the proximity of an object on the road. Not all two-lens cameras are used for taking stereoscopic photos.…
Article summary
A stereo camera is a type of camera with two or more lenses with a separate image sensor or film frame for each lens. This allows the camera to simulate human binocular vision, and therefore gives it the ability to capture three-dimensional images, a process known as stereo photography. Stereo cameras may be used for making stereoviews and 3D pictures for movies, or for range imaging. The distance between the lenses in a typical stereo camera (the intra-axial distance) is about the distance between one's eyes (known as the intra-ocular distance) and is about 6.35 cm, though a longer base line (greater inter-camera distance) produces more extreme 3-dimensionality. In the 1950s, stereo cameras gained some popularity with the Stereo Realist and similar cameras that employed 135 film to make stereo slides. 3D pictures following the theory behind stereo cameras can also be made more inexpensively by taking two pictures with the same camera, but moving the camera a few inches either left or right. If the image is edited so that each eye sees a different image, then the image will appear to be 3D. This method has problems with objects moving in the different views, though works well with still life. Stereo cameras are sometimes mounted in cars to detect the lane's width and the proximity of an object on the road. Not all two-lens cameras are used for taking stereoscopic photos.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.