---
title: STOL
slug: stol
qid: 
snapshot: enwiki-001374372893
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1375496348
tags: [10639794, 22906454, 22960875, 23118434, 23603337, 24043274, 24745122, 29369522, 34543338, 65710263]
---

# STOL

> [!note] Provenance
> Snapshot `enwiki-001374372893` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1375496348> · Licensed CC BY-SA 4.0

Åstol ( ) is a locality situated south of Tjörn Municipality (close to Marstrand), Västra Götaland County, Sweden with 210 inhabitants in 2010. Åstol is an island and a locality in Tjörn Municipality in Rönnäng Parish situated in the Province of Bohuslän. In 2015, Åstol lost its status as an urban area due to its population decreasing to under 200 residents. Instead, the island came to constitute a small residential area. The island is located just south of Tjörn (near Marstrand) and has approximately 200 year-round residents. The island can be reached via the Hakefjord ferry which departs from Rönnäng on Tjörn and also serves Tjörnekalv, as well as Åstol's neighboring island, Dyrön. During the summertime, there is a ferry which connects the island to and from Marstrand.

STOL light aircraft A short takeoff and landing (STOL) aircraft is a fixed-wing aircraft that can take off and land on runways that are much shorter than the typical ones needed for conventional take-off and landing. STOL-capable aircraft are usually light aircraft (mostly propeller-driven utility aircraft, sporters or motor gliders) with a high lift-to-drag ratio and typically also a high aspect ratio, allowing them to achieve minimum takeoff speed (i.e. liftoff speed or V LOF ) much more quickly and thus requiring a shorter accelerating run before taking off (takeoff roll); and perform landing at a lower minimum steady flight speed (V S0 ) and thus also a shorter decelerating run (rollout). Gyrocopters, despite being rotary-wing aircraft, need a forward motion to drive air flow past autorotating rotor blades to generate lift and thus still mandate runways (albeit a very short one) for takeoff and landing. They are therefore also considered STOL aircraft, as they cannot perform vertical takeoff and landing like helicopters. STOL aircraft, including those used in scheduled passenger transport operations, can be operated from STOLport airfields that feature dedicated short runways. They can also operate on improvised airstrips with unpaved runways (e.g., dirt roads or bulldozed grassfield tracks) and/or harsher conditions, such as remote airfields built in high altitude alpine regions, deserts or on snow/ice fields. ==Kits== A number of aircraft modification companies offer STOL kits for improving short-field performance. Crosswinds STOL of Wasilla, Alaska, sells STOL kits for light aircraft, including leading edge cuffs, tip spill plates, inboard flap extensions and STOL fences. The company offers kits for Piper PA-12, PA-14, PA-18, PA-20 and 22, Bellanca Champion Model 7 series, Cessna 170B, 180 and 185. Horton, Inc, of Wellington, Kansas, offers STOL kits under the brand name Horton STOL-Craft, emphasizing that the modifications increase safety by allowing forced landings to occur at lower speeds and thus improve survivability. The Horton modifications include a drooped leading edge cuff, conical cambered wingtips, control surface gap seals and wing fences. The company says: "On an average you can expect to get a 4-7 knot reduction in stall speeds. Flying at these lower stall speeds you can reduce the take-off and landing distances by 10%". Horton STOL kits are available for several Cessna and Piper PA-28 models. Micro AeroDynamics markets vortex generator modification kits for "STOL benefits". The Micro kits are small vortex generators that are glued to the wing leading edge, as well as the underside of the elevator and on the fin. Kits are available for a large number of light aircraft types. Sierra Industries sells Robertson STOL kits, marketed under the name R/STOL, incorporate a drooped leading edge cuff, wing fences, drooping ailerons and an automatic trim system. The company says that installation "allows 15 to 25 MPH slower approaches and requires up to 40% less runway distance". R/STOL kits are available for various Cessna models. Stolairus Aviation of Kelowna, British Columbia, has developed STOL Kits for the de Havilland Canada DHC-2 Beaver and de Havilland Canada DHC-3 Otter to increase lift and reduce stall speeds. The DHC-2 Beaver STOL Kit includes a contoured leading edge, flap-gap seals, wing fences and drooped wingtips. The DHC-3 Otter STOL Kit includes a contoured leading edge and drooped wingtips. ==STOLport== ==CESTOL== Cruise-efficient short takeoff and landing (CESTOL) have very short runway requirements and cruise speeds greater than Mach 0.8. ==Definitions== Many definitions of STOL have been used over time and for regulatory and military purposes. These include: Some manufacturers market their products as STOL without specifying that the aircraft meets an accepted functional definition. ==See also== List of STOL aircraft ESTOLAS VTOL ==References== ==External links== Anatomy of a STOL Aircraft: Designing a Modern Short Take-Off and Landing Aircraft by Chris Heintz
