Strake
≈ 2 min read
Names in other languages
- afStrake
- anStrake
- astStrake
- DeutschStrake
- EnglishStrake
- EspañolStrake
- FrançaisStrake
- ItalianoStrake
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
, whose overlapping planks constitute "strakes". On a vessel's hull, a strake is a longitudinal course of planking or plating which runs from the boat's stempost (at the bows) to the sternpost or transom (at the rear). The garboard strakes are the two immediately adjacent to the keel on each side. The word derives from traditional wooden boat building methods, used in both carvel and clinker construction. In a metal ship, a strake is a course of plating.
, whose overlapping planks constitute "strakes". On a vessel's hull, a strake is a longitudinal course of planking or plating which runs from the boat's stempost (at the bows) to the sternpost or transom (at the rear). The garboard strakes are the two immediately adjacent to the keel on each side. The word derives from traditional wooden boat building methods, used in both carvel and clinker construction. In a metal ship, a strake is a course of plating.
Construction
In small boats strakes may be single continuous pieces of wood. In larger wooden vessels strakes typically comprise several planks which are either scarfed, or butt-jointed and reinforced with a butt block. Where the transverse sections of the vessel's shape are fuller, the strakes are wider; they taper toward the ends. In a riveted steel ship, the strakes were usually lapped and joggled (one strake given projections to match indentions in the one adjoining), but where a smoother finish was sought they might be riveted on a butt strap, though this was weaker. In modern welded construction, the plates are normally butt-welded with full penetration welds all round to adjoining plates within the strake and to adjoining strakes.
Sources
fi:Laidoitus
Text derived from https://en.wikipedia.org/w/index.php?oldid=1309001082 under CC BY-SA 4.0; modifications have been made.