Lesson plan
Strejc method
The Strejc system identification method allows the estimate of the transfer function of a non-periodic, black box-type system based on its step response and is widely used in all branches of industrial and mechanical engineering. It allows specifically to estimate the order n of the studied system, its time constant and its delay. To use the Strejc method, it is necessary to apply a step signal to the system and record its t u and t g parameters by observing the inflection point of the response curve. These parameters are then compared with the ones in the numeric table to estimate what order approximates better the system's behaviour and then find the time constant t with the second column (using the appropriate order).
Article summary
The Strejc system identification method allows the estimate of the transfer function of a non-periodic, black box-type system based on its step response and is widely used in all branches of industrial and mechanical engineering. It allows specifically to estimate the order n of the studied system, its time constant and its delay. To use the Strejc method, it is necessary to apply a step signal to the system and record its t u and t g parameters by observing the inflection point of the response curve. These parameters are then compared with the ones in the numeric table to estimate what order approximates better the system's behaviour and then find the time constant t with the second column (using the appropriate order).
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.