Lesson plan
structural support
A structural support is a part of a building or structure that provides the necessary stiffness and strength in order to resist the internal forces (vertical forces of gravity and lateral forces due to wind and earthquakes) and guide them safely to the ground. External loads (actions of other bodies) that act on buildings cause internal forces (forces and couples by the rest of the structure) in building support structures. Supports can be either at the end or at any intermediate point along a structural member or a constituent part of a building and they are referred to as connections, joints or restraints. Building support structures, no matter what materials are used, have to give accurate and safe results. A structure depends less on the weight and stiffness of a material and more on its geometry for stability. Whatever the condition is, a specific rigidity is necessary for connection designs. The support connection type has effects on the load bearing capacity of each element, which makes up a structural system. Each support condition influences the behaviour of the elements and therefore, the system. Structures can be either Horizontal-span support systems (floor and roof structures) or Vertical building structure systems (walls, frames, cores, etc.)
Article summary
A structural support is a part of a building or structure that provides the necessary stiffness and strength in order to resist the internal forces (vertical forces of gravity and lateral forces due to wind and earthquakes) and guide them safely to the ground. External loads (actions of other bodies) that act on buildings cause internal forces (forces and couples by the rest of the structure) in building support structures. Supports can be either at the end or at any intermediate point along a structural member or a constituent part of a building and they are referred to as connections, joints or restraints. Building support structures, no matter what materials are used, have to give accurate and safe results. A structure depends less on the weight and stiffness of a material and more on its geometry for stability. Whatever the condition is, a specific rigidity is necessary for connection designs. The support connection type has effects on the load bearing capacity of each element, which makes up a structural system. Each support condition influences the behaviour of the elements and therefore, the system. Structures can be either Horizontal-span support systems (floor and roof structures) or Vertical building structure systems (walls, frames, cores, etc.)
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.