Lesson plan
Structured ASIC platform
Structured ASIC is an intermediate technology between ASIC and FPGA, offering high performance, a characteristic of ASIC, and low NRE cost, a characteristic of FPGA. Using structured ASIC allows products to be introduced quickly to market, to have lower cost and to be designed with ease. In a FPGA, interconnects and logic blocks are programmable after fabrication, offering high flexibility of design and ease of debugging in prototyping. However, the capability of FPGAs to implement large circuits is limited, in both size and speed, due to complexity in programmable routing, and significant space occupied by programming elements, e.g. SRAMs, MUXes. On the other hand, ASIC design flow is expensive. Every different design needs a complete different set of masks. The structured ASIC is a solution between these two. It has basically the same structure as a FPGA, but being mask-programmable instead of field-programmable, by configuring one or several via layers between metal layers. Every SRAM configuration bit can be replaced by a choice of putting a via or not between metal contacts. A number of commercial vendors have introduced structured ASIC products. They have a wide range of configurability, from a single via layer to 6 metal and 6 via layers. Altera's Hardcopy-II, eASIC's Nextreme are examples of commercial structured ASICs.
Article summary
Structured ASIC is an intermediate technology between ASIC and FPGA, offering high performance, a characteristic of ASIC, and low NRE cost, a characteristic of FPGA. Using structured ASIC allows products to be introduced quickly to market, to have lower cost and to be designed with ease. In a FPGA, interconnects and logic blocks are programmable after fabrication, offering high flexibility of design and ease of debugging in prototyping. However, the capability of FPGAs to implement large circuits is limited, in both size and speed, due to complexity in programmable routing, and significant space occupied by programming elements, e.g. SRAMs, MUXes. On the other hand, ASIC design flow is expensive. Every different design needs a complete different set of masks. The structured ASIC is a solution between these two. It has basically the same structure as a FPGA, but being mask-programmable instead of field-programmable, by configuring one or several via layers between metal layers. Every SRAM configuration bit can be replaced by a choice of putting a via or not between metal contacts. A number of commercial vendors have introduced structured ASIC products. They have a wide range of configurability, from a single via layer to 6 metal and 6 via layers. Altera's Hardcopy-II, eASIC's Nextreme are examples of commercial structured ASICs.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.