{
  "id": "enwiki-001368557526",
  "slug": "substrate-integrated-waveguide",
  "title": "Substrate-integrated waveguide",
  "qid": "",
  "lead": "A substrate-integrated waveguide (SIW) (also known as post-wall waveguide or laminated waveguide) is a synthetic rectangular electromagnetic waveguide formed in a dielectric substrate by densely arraying metallized posts or via holes that connect the upper and lower metal plates of the substrate. The waveguide can be easily fabricated with low-cost mass-production using through-hole techniques, where the post walls consist of via fences. SIW is known to have similar guided wave and mode characteristics to conventional rectangular waveguide with equivalent guide wavelength. Since the emergence of new communication technologies in the 1990s, there has been an increasing need for high-performance millimeter-wave systems. These need to be reliable, low-cost, compact, and compatible with high-frequencies. Unfortunately, above 10 GHz, the well known microstrip and coplanar lines technologies cannot be used because they have high insertion and radiation losses at these frequencies. The rectangular waveguide topology can overcome these issues, as it offers an excellent immunity against radiation losses and presents low insertion losses. But in their classical form, rectangular waveguide is not compatible with the miniaturization required by modern applications. The concept of SIW was developed in the early 2000s by Ke Wu to reconcile those requirements.…",
  "body": "A substrate-integrated waveguide (SIW) (also known as post-wall waveguide or laminated waveguide) is a synthetic rectangular electromagnetic waveguide formed in a dielectric substrate by densely arraying metallized posts or via holes that connect the upper and lower metal plates of the substrate. The waveguide can be easily fabricated with low-cost mass-production using through-hole techniques, where the post walls consist of via fences. SIW is known to have similar guided wave and mode characteristics to conventional rectangular waveguide with equivalent guide wavelength. Since the emergence of new communication technologies in the 1990s, there has been an increasing need for high-performance millimeter-wave systems. These need to be reliable, low-cost, compact, and compatible with high-frequencies. Unfortunately, above 10&nbsp;GHz, the well known microstrip and coplanar lines technologies cannot be used because they have high insertion and radiation losses at these frequencies. The rectangular waveguide topology can overcome these issues, as it offers an excellent immunity against radiation losses and presents low insertion losses. But in their classical form, rectangular waveguide is not compatible with the miniaturization required by modern applications. The concept of SIW was developed in the early 2000s by Ke Wu to reconcile those requirements. The authors presented a platform for integrating all the components of a microwave circuit inside a single substrate, with a rectangular cross-section. Using a single substrate guarantees a limited volume and a simplicity of manufacture, while the rectangular cross-section of the line provides the advantages of the waveguide topology in terms of losses. a_\\text{eff} = a - \\frac{d^2}{0.95 s}, and a more refined definition used for large values of d/a is a_\\text{eff} = a - 1.08 \\frac{d^2}{s} + 0.1 \\frac{d^2}{a}. With this effective width, the propagation constant of a SIW is similar to that of a classical rectangular waveguide whose width is a_\\text{eff} . The formulas given above are empirical: they were established comparing the dispersion characteristics of different SIWs to those of rectangular waveguide filled with the same dielectric material. \\gamma = \\alpha + j \\beta, and the oscillating electric and magnetic fields in the guide have the form \\begin{align} H_{x,y,z}(x,y,z) &= h_{x,y,z} e^{-\\gamma z} = h_{x,y,z} e^{-\\alpha z} e^{-j\\beta z}. \\\\ E_{x,y,z}(x,y,z) &= e_{x,y,z} e^{-\\gamma z} = e_{x,y,z} e^{-\\alpha z} e^{-j\\beta z}. \\end{align} It is then clear that, while the imaginary part of \\gamma stands for the propagating component, the real component \\alpha describes the loss of intensity during the propagation. This loss is generated by different phenomena, and each of them is represented by a term \\alpha . The most common terms are the following: \\alpha_C the loss due to the external metal conductivity, \\alpha_D the loss due to loss tangent of the dielectric medium filling the waveguide, \\alpha_G the loss due to conductivity of the dielectric medium filling the waveguide, \\alpha_R the loss due to radiation. This decomposition is valid for all kinds of transmission lines. However, for rectangular waveguides, the attenuation due to radiations and substrate conductivity is negligible. Indeed, usually, the substrate is an insulator such that \\alpha_G \\simeq 0 . In the same way, if the wall thickness is much thicker than the skin depth of the signal, no radiation will appear. This is in fact one of the advantages of closed waveguides compared to open lines such as microstrips. The SIWs show comparable or lower losses compared the other traditional planar structures like microstrip or coplanar lines, especially at high frequencies. If the substrate is thick enough, the losses are dominated by the dielectric behavior of the substrate. P_l = \\frac{1}{2} R_s \\int_C |J_s|^2 \\,dl. It can be shown that in a classical rectangular waveguide, the attenuation of the dominant mode \\text{TE}_{10} due to conduction currents is given, in nepers per meter, by \\alpha_C = \\frac{R_s}{a^3 b \\beta k \\eta} (2b\\pi^2 + a^3 k^2) = \\frac{R_s}{\\beta k \\eta} \\left(\\frac{2\\pi^2}{a^3} + \\frac{k^2}{b}\\right), where a is the width of the waveguide, b its height, \\eta = \\sqrt{\\mu / \\epsilon} the wave impedance, k = \\omega \\sqrt{\\mu \\epsilon} the wave vector, \\delta = 1 / \\sqrt{\\pi f \\mu \\sigma} the skin depth in the conductor, R_s = \\frac{1}{\\delta \\sigma} = \\sqrt{\\frac{\\omega \\mu}{2 \\sigma}} is the sheet resistance (of surface impedance). It is noticeable that \\alpha_C is directly linked to the substrate thickness b : the thinner the substrate, the higher the conduction losses. This can be explained keeping in mind that this ohmic losses are determined by integrating the current density on a path enclosing the waveguide walls. On the top and bottom horizontal metallic plates, the current is scaled with 1/b , due to the modification of the field intensity on these plates: when b increases, the field intensity decreases, as well as the currents. In the vertical walls, this variation of J_s^2 is compensated by the lengthening of the integration path C . As a result, the contribution of the vertical vias to the conductor losses is unchanged with b . This is why there is two terms in the expression of \\alpha_C : the first is independent of b , while the second one varies with 1/b . Another key point of the conduction losses experienced by the SIWs is linked to the roughness of the surfaces that may appear due to the synthesis processes. This roughness decreases the effective conductivity of the metallic walls and subsequently increases the losses. This observation is of crucial importance for the design of SIWs, as they are integrated on very thin substrates. In this case, the contribution of the conduction losses on the global attenuation is predominant. \\gamma = \\alpha_D + j \\beta \\simeq \\frac{k^2 \\tan\\delta}{2\\beta} + j\\beta, where \\tan\\delta is the loss tangent of the dielectric substrate. This approximation is correct if \\tan\\delta \\ll 1 , which is usually the case in microwave electronics (at 10&nbsp;GHz, \\tan\\delta = 0 in air, 1.5 \\times 10^{-4} in Teflon, and 1 \\times 10^{-4} in bulk alumina). Then the following identification can be made: \\alpha_D = \\frac{k^2 \\tan\\delta}{2\\beta}. This relation is correct for both electrical and magnetic transverse modes. The dielectric losses \\alpha_D depend only on the substrate and not on the geometry: unlike the conduction losses, \\alpha_D is not influenced by the substrate thickness. It transpires that the only way to reduce \\alpha_D consists in choosing a template with better dielectric properties: the lower the loss tangent \\tan\\delta , the lower the attenuation. s \\leq 2d \\quad \\text{and} \\quad d \\leq \\frac{\\lambda_g}{5}. For a specific traveling mode, the leakages decrease with the increasing frequency and are maximal at the cut-off frequency of the mode. The radiation leakage factor \\alpha_R is independent of the substrate properties and independent of the height of the guide. ==See also== , also ==References== ==External links== Substrate Integrated Waveguide, at microwave101.com",
  "categories": [
    "109403993",
    "23118434",
    "23603337",
    "27179415",
    "27179417",
    "27179473"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1368557526",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1786298417.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001368557526",
    "type": "webpage",
    "title": "Substrate-integrated waveguide",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/substrate-integrated-waveguide",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          17
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          17
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001368557526",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1368557526",
    "note": "Immutable snapshot enwiki-001368557526"
  }
}