superabsorbent polymer

polymers that can absorb and retain extremely large amounts of a liquid relative to their own mass

Uses your system voice; voice and rate in settings.

≈ 4 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

  • Nederlandssuperabsorberend polymeer
  • Françaispolymère superabsorbant
  • Englishsuperabsorbent polymer
  • Bahasa IndonesiaSuperabsorbent polimer
  • Češtinasuperabsorbent
  • DeutschSuperabsorber
  • 日本語高吸水性高分子
  • 中文高吸水性高分子

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A superabsorbent polymer (SAP) (also called slush powder) is a water-absorbing hydrophilic homopolymers or copolymers that can absorb and retain extremely large amounts of a liquid relative to its own mass. Water-absorbing polymers, which are classified as hydrogels when mixed, absorb aqueous solutions through hydrogen bonding with water molecules.

An SAP's ability to absorb water depends on the ionic concentration of the aqueous solution. In deionized and distilled water, an SAP may absorb 300 times its weight (from 30 to 60 times its own volume) and can become up to 99.9% liquid, and when put into a 0.9% saline solution the absorbency drops to approximately 50 times its weight.

The presence of valence cations in the solution impedes the polymer's ability to bond with the water molecule. The SAP's total absorbency and swelling capacity are controlled by the type and degree of cross-linkers used to make the gel. Low-density cross-linked SAPs generally have a higher absorbent capacity and swell to a larger degree.

These types of SAPs also have a softer and stickier gel formation. High density cross-linked polymers exhibit lower absorbent capacity and swell, and the gel strength is firmer and can maintain particle shape even under modest pressure. Superabsorbent polymers are crosslinked in order to avoid dissolution.

There are three main classes of SAPs: Cross‐linked polyacrylates and polyacrylamides Cellulose‐ or starch‐acrylonitrile graft copolymers Cross‐linked maleic anhydride copolymers The largest use of SAPs is found in personal disposable hygiene products, such as baby diapers, adult diapers and sanitary napkins. SAPs are also used for blocking water penetration in underground power or communications cable, in self-healing concrete, horticultural water retention agents, control of spill and waste aqueous fluid, and artificial snow for motion picture and stage production.

The first commercial use was in 1978 for use in feminine napkins in Japan and disposable bed liners for nursing home patients in the United States. Early applications in the US market were with small regional diaper manufacturers as well as Kimberly Clark.

History

Until the 1920s, water-absorbing materials were fiber-based products. Choices were tissue paper, cotton, sponge, and fluff pulp. The water-absorbing capacity of these types of materials is only up to eleven times their weight and most of it is lost under moderate pressure.

In the early 1960s, the United States Department of Agriculture (USDA) was conducting work on materials to improve water conservation in soils. They developed a resin based on the grafting of acrylonitrile polymer onto the backbone of starch molecules (i.e. starch-grafting).

The hydrolyzed product of the hydrolysis of this starch-acrylonitrile co-polymer gave water absorption greater than 400 times its weight. Also, the gel did not release liquid water the way that fiber-based absorbents do. The polymer came to be known as “Super Slurper”.

The USDA gave the technical know-how to several US companies for further development of the basic technology. A wide range of grafting combinations were attempted including work with acrylic acid, acrylamide and polyvinyl alcohol (PVA).

Today's research has proved the ability of natural materials, e.g. polysaccharides and proteins, to perform super absorbent properties in pure water and saline solution (0.9%wt.) within the same range as synthetic polyacrylates do in current applications. Soy protein/poly(acrylic acid) superabsorbent polymers with good mechanical strength have been prepared.

Polyacrylate/polyacrylamide copolymers were originally designed for use in conditions with high electrolyte/mineral content and a need for long term stability including numerous wet/dry cycles. Uses include agricultural and horticultural. With the added strength of the acrylamide monomer, used as medical spill control, wire and cable water blocking.

See also

Sodium polyacrylate Potassium polyacrylate

Text derived from https://en.wikipedia.org/w/index.php?oldid=1368130153 under CC BY-SA 4.0; modifications have been made.

Words in each sectionHistoryHistoryHistory: 266 words266See alsoSee alsoSee also: 25 words25
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot superabsorbent-polymer-072449-46217fd43b3a3565 · hash 46217fd43b3a3565b99e5e45bf88f4f212a50034b2b132b4dc62a775eb92a1db · captured 2026-08-07 · ledger · version history

Cite this page as: encyclopegia.org, “superabsorbent polymer”, snapshot superabsorbent-polymer-072449-46217fd43b3a3565. https://encyclopegia.org/a/superabsorbent-polymer

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.