Swan 36-2

The Swan 36-2 is a Finnish sailboat that was designed by Germán Frers and Andrew Winch as a coastal cruiser and first built in 1988.

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Swan 36-2 is a Finnish sailboat that was designed by Germán Frers and Andrew Winch as a coastal cruiser and first built in 1988. The design was originally marketed by the manufacturer as the Swan 36, but is now usually referred to as the Swan 36-2 to differentiate it from the unrelated 1967 Sparkman & Stephens Swan 36 design.

Production

The design was built by Oy Nautor AB in Finland, from 1988 until 1996, with 55 boats completed, but it is now out of production.

Design

The Swan 36-2 is a recreational keelboat, built predominantly of glassfibre, with wood trim. It has a masthead sloop rig, a raked stem, a reverse transom, an internally mounted spade-type rudder controlled by a wheel and a fixed fin keel. It displaces and carries of lead ballast.

The boat has a draft of with the standard keel. The boat is fitted with a Swedish Volvo Penta 2003R diesel engine of for docking and manoeuvring. The fuel tank holds and the fresh water tank has a capacity of .

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin, two straight settees in the main cabin and an aft cabin with a double "V" berth on the starboard side. The galley is located on the port side just forward of the companionway ladder. The galley is L-shaped and is equipped with a three-burner stove, an ice box and a double sink.

A navigation station is opposite the galley, on the starboard side. The head is located just aft of the bow cabin on the port side. For sailing downwind the design may be equipped with a symmetrical spinnaker.

The design has a hull speed of and a PHRF handicap of 114 to 132.

Operational history

In a 2000 design review, Robert Perry wrote, "when you look at the sail plan you should notice the subtle interplay between sheerline, cove stripe and the double bootstripe. I would guess that Frers has drawn the bootstripe at least eight inches above the DWL. This all works together to accentuate and lower the freeboard.

The sheer spring is subtle and beautiful. Few designers have as good an eye for a sheer as does Frers. The cabintrunk is interesting in that it fairs to a knuckle forward of the mast.

This maximizes interior volume and headroom while keeping deck space."

See also

List of sailing boat types

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372541531 under CC BY-SA 4.0; modifications have been made.

Words in each sectionDesignDesignDesign: 212 words212Operational historyOperational historyOperational history: 102 words102See alsoSee alsoSee also: 26 words26ProductionProductionProduction: 25 words25
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001372541531 · captured 2026-09-01 · ledger · version history

Cite this page as: encyclopegia.org, “Swan 36-2”, snapshot enwiki-001372541531. https://encyclopegia.org/a/swan-36-2

Sources cited in this revision

7 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.