{
  "id": "enwiki-001324606272",
  "slug": "switch-virtual-interface",
  "title": "Switch virtual interface",
  "qid": "",
  "lead": "A switch virtual interface (SVI) or routed VLAN interface (RVI) is a virtual network interface that represents a logical layer-3 interface on a multilayer network switch. VLANs divide broadcast domains in a local area network (LAN) environment. Whenever hosts in one VLAN need to communicate with hosts in another VLAN, the traffic must be routed between them. This is known as inter-VLAN routing. On layer-3 switches it is accomplished by the creation of layer-3 interfaces (SVIs). An SVI is a virtual routed interface that connects a VLAN on the device to the Layer 3 router engine on the same device. Only one VLAN interface can be associated with a VLAN, but you need to configure a VLAN interface for a VLAN only when you want to route between VLANs or to provide IP host connectivity to the device through a virtual routing and forwarding (VRF) instance that is not the management VRF. When you enable VLAN interface creation, a switch creates a VLAN interface for the default VLAN (VLAN 1) to permit remote switch administration. SVIs are generally configured for a VLAN for the following reasons: * To allow traffic to be routed between VLANs by providing a default gateway for the VLAN. * To provide fallback bridging (if required for non-routable protocols). * To provide Layer 3 IP connectivity to the switch. * To support bridging configurations and routing protocol.…",
  "body": "A switch virtual interface (SVI) or routed VLAN interface (RVI) is a virtual network interface that represents a logical layer-3 interface on a multilayer network switch. VLANs divide broadcast domains in a local area network (LAN) environment. Whenever hosts in one VLAN need to communicate with hosts in another VLAN, the traffic must be routed between them. This is known as inter-VLAN routing. On layer-3 switches it is accomplished by the creation of layer-3 interfaces (SVIs). An SVI is a virtual routed interface that connects a VLAN on the device to the Layer 3 router engine on the same device. Only one VLAN interface can be associated with a VLAN, but you need to configure a VLAN interface for a VLAN only when you want to route between VLANs or to provide IP host connectivity to the device through a virtual routing and forwarding (VRF) instance that is not the management VRF. When you enable VLAN interface creation, a switch creates a VLAN interface for the default VLAN (VLAN 1) to permit remote switch administration. SVIs are generally configured for a VLAN for the following reasons: To allow traffic to be routed between VLANs by providing a default gateway for the VLAN. To provide fallback bridging (if required for non-routable protocols). To provide Layer 3 IP connectivity to the switch. To support bridging configurations and routing protocol. To provide an access layer - 'Routed Access' Configuration (in lieu of Spanning Tree Protocol) Advantages include: Much faster than router-on-a-stick, because everything is hardware-switched and -routed. No need for external links from the switch to a router for routing. Not limited to one link. Layer 2 EtherChannels can be used between the switches to get more bandwidth. Latency is much lower, because it does not need to leave the switch. ==References== Cisco Systems, Configure InterVLAN Routing on Layer 3 Switches Cisco Systems, Configuring SVI Cisco Systems, 2006, \"Building Cisco Multilayer Switched Networks\" (Version 3.0), Cisco Systems Inc. Switch Virtual Interfaces (SVI) configuration Data Centre Networking Module (COMH9003) | Cork Institute of Technology",
  "categories": [
    "20474387",
    "23069423",
    "23118434",
    "23468805",
    "23603337",
    "24745114",
    "26698221"
  ],
  "license": "CC BY-SA 4.0",
  "source_uri": "https://en.wikipedia.org/w/index.php?oldid=1324606272",
  "content_hash": "",
  "created_at": null,
  "updated_at": 1764344247.0,
  "claims": [],
  "contradictions": [],
  "confidence": 0.6,
  "csl": {
    "id": "enwiki-001324606272",
    "type": "webpage",
    "title": "Switch virtual interface",
    "author": [
      {
        "family": "Anticloud FZ LLE",
        "literal": "Anticloud FZ LLE"
      }
    ],
    "container-title": "encyclopegia.org",
    "publisher": "Anticloud FZ LLE",
    "publisher-place": "Dubai, United Arab Emirates",
    "URL": "https://encyclopegia.org/a/switch-virtual-interface",
    "issued": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "accessed": {
      "date-parts": [
        [
          2026,
          11,
          19
        ]
      ]
    },
    "license": "CC BY-SA 4.0",
    "DOI": "eo1:enwiki-001324606272",
    "isBasedOn": "https://en.wikipedia.org/w/index.php?oldid=1324606272",
    "note": "Immutable snapshot enwiki-001324606272"
  }
}