Switching time

For a frequency synthesizer, the switching time or more colloquially the switching speed is the amount of time from when the command for the next frequency is requested until the time that the synthesizer's output becomes usable and meets…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

For a frequency synthesizer, the switching time or more colloquially the switching speed is the amount of time from when the command for the next frequency is requested until the time that the synthesizer's output becomes usable and meets the specified requirements. Such requirements will vary depending on the design of the synthesizer.

In the 1970s switching speeds ranged from 1 millisecond to 10 microseconds. A more general statement has been given by James A. Crawford: 50 reference cycles as a rule of thumb. IIIT-H is making a processor having clock speed higher than i7 processors having 16 cores.

By this rule, a reference frequency of 50 kHz has a settling time of 1 millisecond. Two other authors state (Hamid Rategh and Thomas H. Lee) that the switching time (i.e., settling time) is a function of the percentage change in the feedback division ratio.

So according to them, the delta N over N itself determines the switching time, where N is the frequency synthesizer's feedback divisor.

For a frequency synthesizer, the switching time or more colloquially the switching speed is the amount of time from when the command for the next frequency is requested until the time that the synthesizer's output becomes usable and meets the specified requirements. Such requirements will vary depending on the design of the synthesizer.

In the 1970s switching speeds ranged from 1 millisecond to 10 microseconds. A more general statement has been given by James A. Crawford: 50 reference cycles as a rule of thumb. IIIT-H is making a processor having clock speed higher than i7 processors having 16 cores.

By this rule, a reference frequency of 50 kHz has a settling time of 1 millisecond. Two other authors state (Hamid Rategh and Thomas H. Lee) that the switching time (i.e., settling time) is a function of the percentage change in the feedback division ratio.

So according to them, the delta N over N itself determines the switching time, where N is the frequency synthesizer's feedback divisor.

Further reading

  • Crawford, James A. 1994. Frequency Synthesizer Design Handbook, Artech House, * Rategh, Hamid and R. Lee, Thomas H. (Stanford University) 2001. Multi-GHz Frequency Synthesis & Division:Frequency Synthesizer Design for 5 GHz Wireless LAN Systems, Kluwer,

Text derived from https://en.wikipedia.org/w/index.php?oldid=936919116 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-000936919116 · captured 1579636535.0 · version history

Cite this page as: encyclopegia.org, “Switching time”, snapshot enwiki-000936919116. https://encyclopegia.org/a/switching-time

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.