Lesson plan
Switchover
Switchover is the manual switch from one system to a redundant or standby computer server, system, or network upon the failure or abnormal termination of the previously active server, system, or network, or to perform system maintenance, such as installing patches, and upgrading software or hardware. Automatic switchover of a redundant system on an error condition, without human intervention, is called failover. Manual switchover on error would be used if automatic failover is not available, possibly because the overall system is too complex.
Article summary
Switchover is the manual switch from one system to a redundant or standby computer server, system, or network upon the failure or abnormal termination of the previously active server, system, or network, or to perform system maintenance, such as installing patches, and upgrading software or hardware. Automatic switchover of a redundant system on an error condition, without human intervention, is called failover. Manual switchover on error would be used if automatic failover is not available, possibly because the overall system is too complex.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.