Lesson plan
SWTPC 6800
The SWTPC 6800 Computer System, simply referred to as SWTPC 6800, is an early microcomputer developed by the Southwest Technical Products Corporation and introduced in 1975. It was built around the Motorola 6800 microprocessor, from which it gets its name. The SWTPC 6800 was one of the first microcomputers based around the Motorola 6800. The SWTPC 6800 is the progenitor of the widely used and broadly supported SS-50 bus. The SWTPC 6800 became one of the most popular 6800-based systems of its time, owing to its ease of use and ample documentation. Though rudimentary, the MIKBUG resident monitor built into ROM allows the immediate entry of program data after power-up, as opposed to other microcomputers of its day which required bootstrapping such software. Southwest Technical Products introduced the SWTPC 6800 in November 1975 for US$450 ( ) in kit form only. Any contemporary ASCII terminal can be used to interface with the SWTPC 6800. SWTPC sold their own television-set-based terminal, for $275; a crude dot-matrix printer was another optional accessory, for $250. Southwest Technical Products followed up the 6800 with the S/09 in 1979 and the 69/K, 69/A, and 69/56 in 1980. All four replaced the Motorola 6800 processor of the original with its successor the 6809.…
Article summary
The SWTPC 6800 Computer System, simply referred to as SWTPC 6800, is an early microcomputer developed by the Southwest Technical Products Corporation and introduced in 1975. It was built around the Motorola 6800 microprocessor, from which it gets its name. The SWTPC 6800 was one of the first microcomputers based around the Motorola 6800. The SWTPC 6800 is the progenitor of the widely used and broadly supported SS-50 bus. The SWTPC 6800 became one of the most popular 6800-based systems of its time, owing to its ease of use and ample documentation. Though rudimentary, the MIKBUG resident monitor built into ROM allows the immediate entry of program data after power-up, as opposed to other microcomputers of its day which required bootstrapping such software. Southwest Technical Products introduced the SWTPC 6800 in November 1975 for US$450 ( ) in kit form only. Any contemporary ASCII terminal can be used to interface with the SWTPC 6800. SWTPC sold their own television-set-based terminal, for $275; a crude dot-matrix printer was another optional accessory, for $250. Southwest Technical Products followed up the 6800 with the S/09 in 1979 and the 69/K, 69/A, and 69/56 in 1980. All four replaced the Motorola 6800 processor of the original with its successor the 6809.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.