Lesson plan

Synchronization gear

E1 is adjusted (January 1941). A wooden disk attached to the propeller is used to indicate where each round passes through the propeller arc. A synchronization gear (also known as a gun synchronizer or interrupter gear) was a device enabling a single-engine tractor-configuration aircraft to fire its forward-firing armament through the arc of its spinning propeller without bullets striking the blades. This allowed the aircraft, rather than the gun, to be aimed at the target. There were many practical problems, mostly arising from the inherently imprecise nature of an automatic gun's firing, the great (and varying) velocity of the blades of a spinning propeller, and the very high speed at which any gear synchronizing the two had to operate. In practice, all known gears worked on the principle of actively triggering each shot, in the manner of a semi-automatic weapon. Design and experimentation with gun synchronization had been underway in France and Germany in 1913–1914, following the ideas of August Euler, who seems to have been the first to suggest mounting a fixed armament firing in the direction of flight (in 1910). However, the first practical if far from reliable gear to enter operational service was that fitted to the Fokker Eindecker fighters, which entered squadron service with the German Air Service in mid-1915.…

Back to article

Article summary

E1 is adjusted (January 1941). A wooden disk attached to the propeller is used to indicate where each round passes through the propeller arc. A synchronization gear (also known as a gun synchronizer or interrupter gear) was a device enabling a single-engine tractor-configuration aircraft to fire its forward-firing armament through the arc of its spinning propeller without bullets striking the blades. This allowed the aircraft, rather than the gun, to be aimed at the target. There were many practical problems, mostly arising from the inherently imprecise nature of an automatic gun's firing, the great (and varying) velocity of the blades of a spinning propeller, and the very high speed at which any gear synchronizing the two had to operate. In practice, all known gears worked on the principle of actively triggering each shot, in the manner of a semi-automatic weapon. Design and experimentation with gun synchronization had been underway in France and Germany in 1913–1914, following the ideas of August Euler, who seems to have been the first to suggest mounting a fixed armament firing in the direction of flight (in 1910). However, the first practical if far from reliable gear to enter operational service was that fitted to the Fokker Eindecker fighters, which entered squadron service with the German Air Service in mid-1915.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.