Lesson plan
System-specific impulse
System-specific Impulse, I ssp is a measure that describes performance of jet propulsion systems. A reference number is introduced, which defines the total impulse, I tot , delivered by the system, divided by the system mass, m PS : :I ssp =I tot /m PS Because of the resulting dimension, - delivered impulse per kilogram of system mass m PS , this number is called ‘System-specific Impulse’. In SI units, impulse is measured in newton-seconds (N·s) and I ssp in N·s/kg. The I ssp allows a more accurate determination of the propulsive performance of jet propulsion systems than the commonly used Specific Impulse, I sp , which only takes into account the propellant and the thrust engine performance characteristics. Therefore, the I ssp permits an objective and comparative performance evaluation of systems of different designs and with different propellants. The I ssp can be derived directly from actual jet propulsion systems by determining the total impulse delivered by the mass of contained propellant, divided by the known total (wet) mass of the propulsion system. This allows a quantitative comparison of for example, built systems.…
Article summary
System-specific Impulse, I ssp is a measure that describes performance of jet propulsion systems. A reference number is introduced, which defines the total impulse, I tot , delivered by the system, divided by the system mass, m PS : :I ssp =I tot /m PS Because of the resulting dimension, - delivered impulse per kilogram of system mass m PS , this number is called ‘System-specific Impulse’. In SI units, impulse is measured in newton-seconds (N·s) and I ssp in N·s/kg. The I ssp allows a more accurate determination of the propulsive performance of jet propulsion systems than the commonly used Specific Impulse, I sp , which only takes into account the propellant and the thrust engine performance characteristics. Therefore, the I ssp permits an objective and comparative performance evaluation of systems of different designs and with different propellants. The I ssp can be derived directly from actual jet propulsion systems by determining the total impulse delivered by the mass of contained propellant, divided by the known total (wet) mass of the propulsion system. This allows a quantitative comparison of for example, built systems.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.