Lesson plan

Systems Concepts

Systems Concepts, Inc. (now the SC Group), was a company co-founded by Stewart Nelson and Mike Levitt focused on making hardware products related to the DEC PDP-10 series of computers. One of its major products was the SA-10, an interface which allowed PDP-10s to be connected to disk and tape drives designed for use with the channel interfaces of IBM mainframes. Later, Systems Concepts attempted to produce a compatible replacement for the DEC PDP-10 computers. "Mars" was the code name for a family of PDP-10-compatible computers built by Systems Concepts, including the initial SC-30M, the smaller SC-25, and the slower SC-20. These machines were marvels of engineering design; although not much slower than the unique Foonly F-1, they were physically smaller and consumed less power than the much slower DEC KS10 or Foonly F-2, F-3, or F-4 machines. They were also completely compatible with the DEC KL10, and ran all KL10 binaries (including the operating system) with no modifications at about 2-3 times faster than a KL10. When DEC cancelled the Jupiter project in 1983, Systems Concepts hoped to sell their machine to customers with a software investment in PDP-10s. Their spring 1984 announcement generated excitement in the PDP-10 world. TOPS-10 was running on the Mars by the summer of 1984, and TOPS-20 by early fall.…

Back to article

Article summary

Systems Concepts, Inc. (now the SC Group), was a company co-founded by Stewart Nelson and Mike Levitt focused on making hardware products related to the DEC PDP-10 series of computers. One of its major products was the SA-10, an interface which allowed PDP-10s to be connected to disk and tape drives designed for use with the channel interfaces of IBM mainframes. Later, Systems Concepts attempted to produce a compatible replacement for the DEC PDP-10 computers. "Mars" was the code name for a family of PDP-10-compatible computers built by Systems Concepts, including the initial SC-30M, the smaller SC-25, and the slower SC-20. These machines were marvels of engineering design; although not much slower than the unique Foonly F-1, they were physically smaller and consumed less power than the much slower DEC KS10 or Foonly F-2, F-3, or F-4 machines. They were also completely compatible with the DEC KL10, and ran all KL10 binaries (including the operating system) with no modifications at about 2-3 times faster than a KL10. When DEC cancelled the Jupiter project in 1983, Systems Concepts hoped to sell their machine to customers with a software investment in PDP-10s. Their spring 1984 announcement generated excitement in the PDP-10 world. TOPS-10 was running on the Mars by the summer of 1984, and TOPS-20 by early fall.…

Key claims

  1. release date: 1993 — source: Wikipedia, revision 1334713269, retrieved 2026-10-20 · confidence 0.95

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. The record states that the release date is "1993". What evidence would count against this claim?
  3. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  4. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

  1. Wikipedia, “Systems Concepts”, revision 1334713269, retrieved 2026-10-20 https://en.wikipedia.org/w/index.php?oldid=1334713269

Key claims and bibliography are generated from the same tracked claims and sources as the article page.