Lesson plan
Sytek
Sytek, Inc., known as Hughes LAN Systems, Inc. (HLS), after being acquired by Hughes Electronics and known as Whittaker Communications, Inc. (WCI), since April 24, 1995, created the NetBIOS API, used by Microsoft to make its early networks. Sytek was founded in Silicon Valley and last officed in their own building on Charleston Road in Mountain View. During this crucial period in LAN development, there were two factions within IBM competing over the basic LAN architecture. One group, the telephone switch group from Geneva, liked a central hub, with a network of distributed twisted pair conductors, as is used in phone systems. The other group, Entry Systems Division from Boca Raton, liked the idea of a distributed bus architecture. Building on prior work done by such companies as Intech Labs (aka American Modem & AMDAX), Sytek built an RF transceiver that operated on cable TV frequencies. It received in the High VHF band and transmitted in the Low VHF band. These bands were referred to as the forward and reverse channels. Within any given frequency band, it was possible to have many, many, virtual circuits between devices. In order to increase the advantage of using FDM on the cable, Sytek added an algorithm based on CSMA/CD. There were few, if any, IEEE standards at that time.…
Article summary
Sytek, Inc., known as Hughes LAN Systems, Inc. (HLS), after being acquired by Hughes Electronics and known as Whittaker Communications, Inc. (WCI), since April 24, 1995, created the NetBIOS API, used by Microsoft to make its early networks. Sytek was founded in Silicon Valley and last officed in their own building on Charleston Road in Mountain View. During this crucial period in LAN development, there were two factions within IBM competing over the basic LAN architecture. One group, the telephone switch group from Geneva, liked a central hub, with a network of distributed twisted pair conductors, as is used in phone systems. The other group, Entry Systems Division from Boca Raton, liked the idea of a distributed bus architecture. Building on prior work done by such companies as Intech Labs (aka American Modem & AMDAX), Sytek built an RF transceiver that operated on cable TV frequencies. It received in the High VHF band and transmitted in the Low VHF band. These bands were referred to as the forward and reverse channels. Within any given frequency band, it was possible to have many, many, virtual circuits between devices. In order to increase the advantage of using FDM on the cable, Sytek added an algorithm based on CSMA/CD. There were few, if any, IEEE standards at that time.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.