TAE buffer

Uses your system voice; voice and rate in settings.

Q166627Snapshot

≈ 3 min read

Names in other languages

  • РусскийТрис-ацетатный буфер
  • DeutschTAE-Puffer
  • EnglishTAE buffer
  • EspañolTampón TAE
  • FrançaisTampon TAE
  • ItalianoBuffer TAE
  • PortuguêsTampão TAE
  • 中文TAE緩衝液

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

TAE buffer is a buffer solution containing a mixture of Tris base, acetic acid and EDTA. In molecular biology, it is used in agarose electrophoresis typically for the separation of nucleic acids such as DNA and RNA. It is made up of Tris-acetate buffer, usually at pH 8.3, and EDTA, which sequesters divalent cations. TAE has a lower buffer capacity than TBE and can easily become exhausted, but linear, double stranded DNA runs faster in TAE. According to studies by Brody and Kern, sodium boric acid is a superior and cheaper conductive media for most DNA gel electrophoresis applications.

TAE buffer is a buffer solution containing a mixture of Tris base, acetic acid and EDTA. In molecular biology, it is used in agarose electrophoresis typically for the separation of nucleic acids such as DNA and RNA. It is made up of Tris-acetate buffer, usually at pH 8.3, and EDTA, which sequesters divalent cations. TAE has a lower buffer capacity than TBE and can easily become exhausted, but linear, double stranded DNA runs faster in TAE. According to studies by Brody and Kern, sodium boric acid is a superior and cheaper conductive media for most DNA gel electrophoresis applications.

Uses

TAE (Tris-acetate-EDTA) buffer is used as both a running buffer and in agarose gels. Its use in denaturing gradient gel electrophoresis methods for broad-range mutation analysis has also been described. TAE has been used at various concentrations to study the mobility of DNA in solution with and without sodium chloride. However, high concentrations of sodium chloride (and many other salts) in a DNA sample retard its mobility. This may lead to incorrect interpretations of the resulting DNA banding pattern.

Preparation

TAE buffer is commonly prepared as a 50× stock solution for laboratory use. A 50× stock solution can be prepared by dissolving 242 g Tris base in water, adding 57.1 ml glacial acetic acid, and 100 ml of 500 mM EDTA (pH 8.0) solution, and bringing the final volume up to 1 litre. This stock solution can be diluted 49:1 with water to make a 1× working solution. This 1× solution will contain 40 mM Tris, 20 mM acetic acid, and 1 mM EDTA. 2 M = 2000 mM so 2000 mM /50 = 40 mM for 1×. 1M = 1000 mM so 1000 mM /50 = 20 mM for 1×. 50 mM /50 = 1 mM for 1×. First of all, these ingredients should be dissolved in 500 ml, then made up to 1000 ml. Note: EDTA will take more time to dissolve, so while dissolving EDTA use magnetic stirrer (few amounts of EDTA in 3 or 4 times). A step-by-step recipe of the preparation method for 50× TAE buffer is available on protocols.io.

See also

TBE buffer LB buffer

Notes

References

__NOTOC__

Text derived from https://en.wikipedia.org/w/index.php?oldid=1316647610 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot tae-buffer-020062-f22000b4b61b1e4d · hash f22000b4b61b1e4d25ed5824d1446c49780bc973d4d049fc0b6f4f03f293e2ac · captured 1760373109.0 · version history

Cite this page as: encyclopegia.org, “TAE buffer”, snapshot tae-buffer-020062-f22000b4b61b1e4d. https://encyclopegia.org/a/tae-buffer

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.