Lesson plan

Tangent modulus

In solid mechanics, the tangent modulus is the slope of the stress–strain curve at any specified stress or strain. Below the proportional limit (the limit of the linear elastic regime) the tangent modulus is equivalent to Young's modulus. Above the proportional limit the tangent modulus varies with strain and is most accurately found from test data. The Ramberg–Osgood equation relates Young's modulus to the tangent modulus and is another method for obtaining the tangent modulus. The tangent modulus is useful in describing the behavior of materials that have been stressed beyond the elastic region. When a material is plastically deformed there is no longer a linear relationship between stress and strain as there is for elastic deformations. The tangent modulus quantifies the "softening" or "hardening" of material that generally occurs when it begins to yield. Although the material softens it is still generally able to sustain more load before ultimate failure. Therefore, more weight efficient structure can be designed when plastic behavior is considered. For example, a structural analyst may use the tangent modulus to quantify the buckling failure of columns and flat plates.

Back to article

Article summary

In solid mechanics, the tangent modulus is the slope of the stress–strain curve at any specified stress or strain. Below the proportional limit (the limit of the linear elastic regime) the tangent modulus is equivalent to Young's modulus. Above the proportional limit the tangent modulus varies with strain and is most accurately found from test data. The Ramberg–Osgood equation relates Young's modulus to the tangent modulus and is another method for obtaining the tangent modulus. The tangent modulus is useful in describing the behavior of materials that have been stressed beyond the elastic region. When a material is plastically deformed there is no longer a linear relationship between stress and strain as there is for elastic deformations. The tangent modulus quantifies the "softening" or "hardening" of material that generally occurs when it begins to yield. Although the material softens it is still generally able to sustain more load before ultimate failure. Therefore, more weight efficient structure can be designed when plastic behavior is considered. For example, a structural analyst may use the tangent modulus to quantify the buckling failure of columns and flat plates.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.