Tank connector

Tank connectors are a type of tank fitting also known as bulkhead fittings, tank inlets, tank outlets, or tank nipples.

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Tank connectors are a type of tank fitting also known as bulkhead fittings, tank inlets, tank outlets, or tank nipples. They are designed to allow the passage of liquids through the sealed walls of tanks or vessels, ensuring leak-proof connection. This fitting must be leakage proof, as the water supply (inward and outward) depends on same.

Many different varieties of tank connectors exist. Tank connectors are widely made of plastic (PVC) or brass. They have a flange either on the edge of one side or in the center.

They are supplemented with a rubber washer or a plastic washer with one or two hexagonal flange nuts to tighten the connector to the tank wall. Those with two nuts usually require some silicone or other sealant to prevent fluid passing along the threads. The size of a connector varies from 1/2 to 4 in.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1283861094 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001283861094 · captured 2025-04-04 · ledger · version history

Cite this page as: encyclopegia.org, “Tank connector”, snapshot enwiki-001283861094. https://encyclopegia.org/a/tank-connector

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.