Lesson plan
Tapping machine
A tapping machine is a device used to test the impact sound insulation of floors, for measurements of impact noise (noise of footsteps) in the field of building acoustics. The standard tapping machine has five hammers placed in a line. Each hammer is lifted and dropped in turn, creating 10 impacts per second on the floor. In the room below or adjacent, a sound level meter is used to measure the sound level created by the impacts. Because the force and frequency of the impacts is known, the impact insulation provided by the floor can be determined from the sound level.
Article summary
A tapping machine is a device used to test the impact sound insulation of floors, for measurements of impact noise (noise of footsteps) in the field of building acoustics. The standard tapping machine has five hammers placed in a line. Each hammer is lifted and dropped in turn, creating 10 impacts per second on the floor. In the room below or adjacent, a sound level meter is used to measure the sound level created by the impacts. Because the force and frequency of the impacts is known, the impact insulation provided by the floor can be determined from the sound level.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.