Target strength
≈ 4 min read
Names in other languages
- EnglishTarget strength
- 日本語ターゲット・ストレングス
- 中文目标强度
- 中文目标强度
- 简体中文目标强度
- 繁體中文目標強度
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
. The target strength is a logarithmic measure of the area of a sonar target. It is typically used to quantify acoustical size of fish, marine mammals, mines or submarines and is expressed in units of decibels. For fish such as salmon, the target size varies with the length of the fish and a 5 cm fish could have a target strength of about -50 dB. The target strength of a fish also depends on the orientation of the fish at the moment of sonification, which in turn changes the scattering cross-section of the fish and any air-filled cavities of the fish. The effect of this means that behavioral reaction affects observed biomass, for example fish evading the research vessel at night due to strong lights and vibrations from the hull and machinery. Target strength is often observed on or near a specific frequency where the target is most resonant. Narrowband (CW) pulses have historically been used, but there is ongoing research into using wideband (FM) pulses for improved classification.
. The target strength is a logarithmic measure of the area of a sonar target. It is typically used to quantify acoustical size of fish, marine mammals, mines or submarines and is expressed in units of decibels. For fish such as salmon, the target size varies with the length of the fish and a 5 cm fish could have a target strength of about -50 dB. The target strength of a fish also depends on the orientation of the fish at the moment of sonification, which in turn changes the scattering cross-section of the fish and any air-filled cavities of the fish. The effect of this means that behavioral reaction affects observed biomass, for example fish evading the research vessel at night due to strong lights and vibrations from the hull and machinery. Target strength is often observed on or near a specific frequency where the target is most resonant. Narrowband (CW) pulses have historically been used, but there is ongoing research into using wideband (FM) pulses for improved classification. TS=10 \cdot \log \left ( \frac{I_r}{I_i} \right ) dB = 10 \cdot \log \left [ \frac{\sigma}{4\pi} \right ] dB Where: I_r is the reflected intensity from target I_i is the incident intensity on target \sigma is the backscattering cross-section Target strength of a sphere with radius a , large compared to the wavelength, assuming reference distance 1 meter: \sigma = \pi \cdot a ^ 2 TS = 10 \cdot \log \left [ \frac{\sigma}{4\pi} \right ] dB = 10 \cdot \log \left [ \frac{ a ^ 2 }{ 4 } \right ] dB Thus, for a sphere of radius 2 meters, the target strength is 0 dB. NOAA has a calculator that can be used to inspect the target strength of calibration spheres made out of copper or tungsten carbide in relation to physical parameters found in the ocean.
Further reading
"Introduction to the use of sonar systems for estimating fish biomass, FAO Fisheries Technical Paper No. 191, Revision 1, FAO 1982" Fisheries Acoustics Simmonds, E John and MacLennan, David N (2005) Blackwell Publishing. C. S. Clay & H. Medwin, Acoustical Oceanography (Wiley, New York, 1977).
Text derived from https://en.wikipedia.org/w/index.php?oldid=1372883008 under CC BY-SA 4.0; modifications have been made.