Taylor series

In mathematical analysis, the Taylor series or Taylor expansion of a function is an infinite sum of terms that are expressed in terms of the function's derivatives at a single point.

Uses your system voice; voice and rate in settings.

≈ 23 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In mathematical analysis, the Taylor series or Taylor expansion of a function is an infinite sum of terms that are expressed in terms of the function's derivatives at a single point. For most common functions, the function and the sum of its Taylor series are equal near this point. Taylor series are named after Brook Taylor, who introduced them in 1715.

A Taylor series is also called a Maclaurin series when is the point where the derivatives are considered, after Colin Maclaurin, who made extensive use of this special case of Taylor series in the 18th century. The partial sum formed by the first terms of a Taylor series is a polynomial of degree that is called the th Taylor polynomial of the function.

Taylor polynomials are approximations of a function, which become generally more accurate as increases. Taylor's theorem gives quantitative estimates on the error introduced by the use of such approximations. If the Taylor series of a function is convergent, its sum is the limit of the infinite sequence of the Taylor polynomials.

A function may differ from the sum of its Taylor series, even if its Taylor series is convergent. A function is analytic at a point if it is equal to the sum of its Taylor series in some open interval (or open disk in the complex plane) containing .

This implies that the function is analytic at every point of the interval (or disk). f(a) + \frac {f'(a)}{1!}(x-a) + \frac{f(a)}{2!} (x-a)^2+ \cdots = \sum_{n=0} ^ {\infty} \frac {f^{(n)}(a)}{n!} (x-a)^{n}. Here, denotes the factorial of . The function denotes the th derivative of evaluated at the point .

The derivative of order zero of is defined to be itself and and are both defined to be  . This series can be written by using sigma notation, as in the right side formula.

The corresponding Taylor polynomial of degree is T_n(x)=\sum_{k=0}^{n}\frac{f^{(k)}(a)}{k!}(x-a)^k. When , the series is also called a Maclaurin series and takes the form: f(0)+\frac {f'(0)}{1!} x+ \frac{f(0)}{2!} x^2+ \cdots = \sum_{n=0} ^ {\infty} \frac {f^{(n)}(0)}{n!} x^{n}. Taylor series inherit the basic properties of power series. Taylor series can also be combined algebraically.

Sums, differences, products, and scalar multiples of Taylor series are obtained by the corresponding operations on power series. In particular, the Taylor series of f(x)g(x) around a point x=a is the Cauchy product of the Taylor series of f(x) and g(x) about x=a . Compositions of functions having Taylor series likewise have Taylor series, obtained by substituting one convergent power series into another when the substitution is valid.

A Taylor series may be differentiated and integrated term by term. Thus \frac{d}{dx}\sum_{n=0}^{\infty} c_n (x-a)^n = \sum_{n=1}^{\infty} n c_n (x-a)^{n-1}, and \int \sum_{n=0}^{\infty} c_n (x-a)^n\,dx = C+\sum_{n=0}^{\infty} \frac{c_n}{n+1}(x-a)^{n+1}.

The differentiated and integrated series have the same radius of convergence as the original power series, although the convergence behavior at the boundary may be different. These properties sometimes allow the Taylor series of functions, such as the arctangent, to be computed in terms of simpler series, such as the geometric series. \frac1{1-x} = 1 + x + x^2 + x^3 + \cdots,\quad |x| one gets \frac{d}{dx}\frac{1}{1-x} = \frac{1}{(1-x)^2} = 0 + 1 + 2x + 3x^2 + \cdots, \quad |x| Thus \frac{1}{(1-x)^2} = \sum_{n=1}^\infty nx^{n-1},\quad |x| This process can be iterated, giving \frac{1}{(1-x)^3} = \sum_{n=2}^\infty n(n-1)x^{n-2},\quad |x| \frac{1}{(1-x)^4} = \sum_{n=3}^\infty n(n-1)(n-2)x^{n-3},\quad |x| and so forth. \frac1{1-t} = 1 + t + t^2 + t^3 + \cdots,\quad |t| one gets -\log(1-x) = \int_0^x \frac{dt}{1-t} = x + \frac{x^2}{2} + \frac{x^3}{3} + \frac{x^4}{4} + \cdots,\quad |x| This gives the Maclaurin series \log(1-x)=-\sum_{n=1}^\infty \frac{x^n}{n}, valid for |x| .

Taylor series can be composed, for example if the Taylor series of f(t) is known, then the Taylor series of f(x^n) is obtained by evaluating at t=x^n term by term. For instance, the geometric series 1/(1-t) = 1+t+t^2+\cdots evaluated at t=-x^2 gives \frac{1}{1+x^2} = 1 - x^2 + x^4 - x^6 + \cdots = \sum_{n=0}^\infty (-1)^n x^{2n}.

This last series can be integrated term-by-term to give \arctan x = \int_0^x \frac{dt}{1+t^2} = \sum_{n=0}^\infty \frac{(-1)^n}{2n+1}x^{2n+1}, for |x| . f(x)=\ln(\cos x),\quad x\in\bigl({-\tfrac\pi2}, \tfrac\pi2\bigr), one may first rewrite the function as f(x)={\ln}\bigl(1+(\cos x-1)\bigr), the composition of two functions and . The Taylor series for the natural logarithm is (using big O notation) \ln(1+x) = x - \frac{x^2}2 + \frac{x^3}3 + O{\left(x^4\right)} and for the cosine function \cos x - 1 = -\frac{x^2}2 + \frac{x^4}{24} - \frac{x^6}{720} + O{\left(x^8\right)}.

The first several terms from the second series can be substituted into each term of the first series. Because the first term in the second series has degree 2, three terms of the first series suffice to give a polynomial of degree 7: \begin{align}f(x) &= \ln\bigl(1+(\cos x-1)\bigr) \\ &= (\cos x-1) - \tfrac12(\cos x-1)^2 + \tfrac13(\cos x-1)^3+ O{\left((\cos x-1)^4\right)} \\ &= - \frac{x^2}2 - \frac{x^4}{12} - \frac{x^6}{45}+O{\left(x^8\right)}. \end{align} Since the cosine is an even function, the coefficients for all the odd powers are zero. e^x =1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \frac{x^4}{4!}+\cdots, and the series for cosine is \cos x = 1 - \frac{x^2}{2!} + \frac{x^4}{4!} - \cdots.

Assume the series for their quotient is \frac{e^x}{\cos x} = c_0 + c_1 x + c_2 x^2 + c_3 x^3 + c_4x^4 + \cdots Multiplying both sides by the denominator and then expanding it as a series yields \begin{align} e^x &= \left(c_0 + c_1 x + c_2 x^2 + c_3 x^3 + c_4x^4 + \cdots\right)\left(1 - \frac{x^2}{2!} + \frac{x^4}{4!} - \cdots\right) \\[5mu] &= c_0 + c_1x + \left(c_2 - \frac{c_0}{2!}\right)x^2 + \left(c_3 - \frac{c_1}{2!}\right)x^3+\left(c_4-\frac{c_2}{2!}+\frac{c_0}{4!}\right)x^4 + \cdots \end{align} Comparing the coefficients of with the coefficients of , c_0 = 1,\ \ c_1 = 1,\ \ c_2 - \tfrac12 c_0 = \tfrac12,\ \ c_3 - \tfrac12 c_1 = \tfrac16,\ \ c_4 - \tfrac12 c_2 + \tfrac1{24} c_0 = \tfrac1{24},\ \ldots. The coefficients of the series for can thus be computed one at a time, amounting to long division of the series for and : \frac{e^x}{\cos x}=1 + x + x^2 + \tfrac23 x^3 + \tfrac12 x^4 + \cdots.

S(x) = \int_0^x \sin(t^2)\,dt and S(x) cannot be expressed in terms of elementary functions. Its Maclaurin series can be determined by termwise integration of the series \sin(t^2) = \sum_{n=0}^\infty \frac{(-1)^n}{(2n+1)!}t^{4n+2}, giving S(x) = \sum_{n=0}^\infty \frac{(-1)^n}{(4n+3)(2n+1)!}x^{4n+3}. y-y=0, suppose that y=\sum_{n=0}^{\infty}a_nx^n. Then y=\sum_{n=2}^{\infty}n(n-1)a_nx^{n-2} =\sum_{n=0}^{\infty}(n+2)(n+1)a_{n+2}x^n. Substitution into the differential equation gives \sum_{n=0}^{\infty}\bigl((n+2)(n+1)a_{n+2}-a_n\bigr)x^n=0.

Since power series expansions are unique, each coefficient must vanish, so a_{n+2}=\frac{a_n}{(n+2)(n+1)}. The even and odd coefficients are therefore determined separately by the arbitrary constants a_0 and a_1 : y=a_0\left(1+\frac{x^2}{2!}+\frac{x^4}{4!}+\cdots\right) +a_1\left(x+\frac{x^3}{3!}+\frac{x^5}{5!}+\cdots\right).

Thus y=a_0\cosh x+a_1\sinh x, or equivalently y=C_1e^x+C_2e^{-x} . f(x)=\sum_{k=0}^{n}\frac{f^{(k)}(a)}{k!}(x-a)^k+R_n(x). The behavior of the remainder as tends to infinity determines whether the Taylor series represents the original function, which are questions of convergence and analyticity. f(x)=\sum_{k=0}^\infty\frac{\Delta^k [f](a)}{k!} \,(x-a)_k which interpolates a polynomial f in terms of its finite differences evaluated at a single point a , and where (x-a)_k is the falling factorial. For a polynomial, this series terminates and gives the polynomial exactly; more generally, a function admits a Gregory–Newton development under suitable analytic hypotheses, classically formulated by Niels Erik Nørlund in terms of holomorphy in a half-plane together with an exponential type growth condition.

One generalization of the Taylor series that does converge to the value of the function itself for any bounded continuous function on , and this can be done by using the calculus of finite differences. Specifically, the following theorem, due to Einar Hille, that for any , \lim_{h\to 0^+}\sum_{n=0}^\infty \frac{t^n}{n!}\frac{\Delta_h^nf(a)}{h^n} = f(a+t). Here is the th finite difference operator with step size .

The series is precisely the Taylor series, except that divided differences appear in place of differentiation. When the function is analytic at , the terms in the series converge to the terms of the Taylor series, and in this sense generalizes the usual Taylor series.

In general, for any infinite sequence , the following power series identity holds: \sum_{n=0}^\infty\frac{u^n}{n!}\Delta^na_i = e^{-u}\sum_{j=0}^\infty\frac{u^j}{j!}a_{i+j}. So in particular, f(a+t) = \lim_{h\to 0^+} e^{-t/h}\sum_{j=0}^\infty f(a+jh) \frac{(t/h)^j}{j!}.

The series on the right is the expected value of , where is a Poisson-distributed random variable that takes the value with probability . Hence, f(a+t) = \lim_{h\to 0^+} \int_{-\infty}^\infty f(a+x)dP_{t/h,h}(x). The law of large numbers implies that the identity holds. f(x) = \begin{cases} e^{-1/x^2} & \text{if } x \neq 0, \\[3mu] 0 & \text{if } x = 0 \end{cases} is infinitely differentiable at x=0 , and all of its derivatives at 0 are equal to zero.

Its Taylor series at 0 is therefore the zero series, even though the function itself is not identically zero. This gives a standard example of a non-analytic smooth function. More generally, the Taylor series of a function represents the function at a point x precisely when the remainder terms in Taylor's theorem tend to zero at that point.

If f(x)=\sum_{k=0}^n \frac{f^{(k)}(a)}{k!}(x-a)^k+R_n(x), then the Taylor series converges to f(x) exactly when \lim_{n\to\infty} R_n(x)=0. A function is called analytic at a point if it is equal to the sum of its Taylor series in some open interval around that point, or, in the complex case, in some open disk.

Equivalently, a function is analytic in a region if it is locally given by a convergent power series. Thus, if f(x)=\sum_{n=0}^{\infty}a_n(x-b)^n near b , then differentiating the series term by term and setting x=b gives a_n=\frac{f^{(n)}(b)}{n!}. Thus the power series expansion of an analytic function is its Taylor series.

In real analysis, infinite differentiability does not imply analyticity, as the example above shows. Borel's lemma implies that every power series is the Taylor series of some smooth function. In complex analysis, however, every holomorphic function is analytic.

A function whose Taylor series converges to the function throughout the whole complex plane is called an entire function. Polynomials, the exponential function, and the sine and cosine functions are entire functions. \sum_{n=0}^\infty c_n(x-a)^n, there is a number R , called the radius of convergence, such that the series converges absolutely for |x-a| and diverges for |x-a|>R . The radius may be zero, finite and positive, or infinite.

It is given by the Cauchy–Hadamard formula \frac{1}{R}=\limsup_{n\to\infty}|c_n|^{1/n}, with the usual conventions for R=0 and R=\infty . When the limit exists, the ratio test often gives R=\lim_{n\to\infty}\left|\frac{c_n}{c_{n+1}}\right|.

Thus, when a Taylor series converges, it does so in an open interval centered at a in the real case, or in an open disk centered at a in the complex case. The behavior at the boundary points may vary: the series may converge at some, all, or none of them.

For a complex analytic function, the radius of convergence of the Taylor series at a is the distance from a to the nearest point where the function cannot be continued holomorphically. In many common examples this is the distance to the nearest singularity in the complex plane. This explains the different radii of convergence for familiar Taylor series.

The series for e^x , \sin x , and \cos x have infinite radius of convergence because these functions are entire. By contrast, the Taylor series for \log(1+x) at x=0 has radius of convergence 1 , because the nearest singularity is at x=-1 . Complex singularities can determine the radius of convergence even for functions that are smooth on the real line.

For example, \frac{1}{1+x^2} is smooth for every real x , but its Taylor series at 0 has radius of convergence 1 , because the corresponding complex function has singularities at x=i and x=-i . The radius of convergence should not be confused with the quality of approximation by a low-degree Taylor polynomial.

A Taylor polynomial may approximate a function accurately near the center even if the full Taylor series has a small radius of convergence. Conversely, near the boundary of the interval or disk of convergence, the Taylor series may converge slowly. Outside the radius of convergence, the Taylor series does not represent the function.

A Taylor series cannot be centered at a point where the function is not analytic. Some singularities, namely poles, can be accounted for by a Laurent series.

If f has a pole of order k at z=a , then near a it has a Laurent series of the form \sum_{n=-k}^{\infty} a_n (z-a)^n . A meromorphic function is a function which is analytic except at isolated poles; near each pole it has a Laurent series with only finitely many negative-power terms. More generally, a function analytic in an annulus r has a convergent Laurent series of the form \sum_{n=-\infty}^{\infty} a_n (z-a)^n in that annulus.

Other types of singularities, namely branch points, can occur for algebraic functions. If f(z) is an algebraic function of a complex variable z and z=a is a branch point, then f(z) need not have a Taylor series based at z=a . However, after a change of variables z-a=t^e, where e is a positive integer called the ramification index, a branch of the function becomes analytic as a function of t . The resulting expansion in fractional powers of z-a is known as a Puiseux series.

Taylor series in multiple variables

The Taylor series may also be generalized to functions of more than one variable with \begin{align} T(x_1,\ldots,x_d) &= \sum_{n_1=0}^\infty \cdots \sum_{n_d = 0}^\infty \frac{(x_1-a_1)^{n_1}\cdots (x_d-a_d)^{n_d}}{n_1!\cdots n_d!}\,\left(\frac{\partial^{n_1 + \cdots + n_d}f}{\partial x_1^{n_1}\cdots \partial x_d^{n_d}}\right)(a_1,\ldots,a_d) \\ &= f(a_1, \ldots,a_d) + \sum_{j=1}^d \frac{\partial f(a_1, \ldots,a_d)}{\partial x_j} (x_j - a_j) + \frac{1}{2!} \sum_{j=1}^d \sum_{k=1}^d \frac{\partial^2 f(a_1, \ldots,a_d)}{\partial x_j \partial x_k} (x_j - a_j)(x_k - a_k) \\ & \qquad \qquad + \frac{1}{3!} \sum_{j=1}^d\sum_{k=1}^d\sum_{l=1}^d \frac{\partial^3 f(a_1, \ldots,a_d)}{\partial x_j \partial x_k \partial x_l} (x_j - a_j)(x_k - a_k)(x_l - a_l) + \cdots, \\ &= \sum_{|\alpha| \geq 0}\frac{(\mathbf{x}-\mathbf{a})^\alpha}{\alpha !} \left({\mathrm{\partial}^{\alpha}}f\right)(\mathbf{a}). \end{align} The last expression is the multivariate Taylor series in terms of multi-index notation with a full analogy to the single variable case. For example, for a function that depends on two variables, and , the Taylor series to second order about the point is f(a,b) +(x-a) f_x(a,b) +(y-b) f_y(a,b) + \frac{1}{2!}\Big( (x-a)^2 f_{xx}(a,b) + 2(x-a)(y-b) f_{xy}(a,b) +(y-b)^2 f_{yy}(a,b) \Big) where the subscripts denote the respective partial derivatives.

T(\mathbf{x}) = f(\mathbf{a}) + (\mathbf{x} - \mathbf{a})^\mathsf{T} D f(\mathbf{a}) + \frac{1}{2!} (\mathbf{x} - \mathbf{a})^\mathsf{T} \left \{D^2 f(\mathbf{a}) \right \} (\mathbf{x} - \mathbf{a}) + \cdots, where is the gradient of evaluated at and is the Hessian matrix. f(x,y)=e^x\ln(1+y), one first computes all the necessary partial derivatives: \begin{align} f_x &= e^x\ln(1+y), & f_y &= \frac{e^x}{1+y}, \\ f_{xx} &= e^x\ln(1+y), & f_{yy} &= -\frac{e^x}{(1+y)^2}, \\ f_{xy} &= f_{yx} = \frac{e^x}{1+y}. \end{align} Evaluating these derivatives at the origin gives the Taylor coefficients \begin{align} f_x(0,0) &= 0, & f_y(0,0) &= 1, \\ f_{xx}(0,0) &= 0, & f_{yy}(0,0) &= -1, \\ f_{xy}(0,0) &= 1. \end{align} Substituting these values in to the general formula \begin{align} T(x,y) &= f(a,b) +(x-a) f_x(a,b) +(y-b) f_y(a,b) \\ &\qquad {}+\frac{1}{2!}\left( (x-a)^2f_{xx}(a,b) + 2(x-a)(y-b)f_{xy}(a,b) +(y-b)^2 f_{yy}(a,b) \right)+ \cdots \end{align} produces \begin{align} T(x,y) &= 0 + 0(x-0) + 1(y-0) + \frac{1}{2}\big( 0(x-0)^2 + 2(x-0)(y-0) + (-1)(y-0)^2 \big) + \cdots \\ &= y + xy - \tfrac12 y^2 + \cdots \end{align} Since is analytic in , we have e^x\ln(1+y)= y + xy - \tfrac12 y^2 + \cdots, \qquad |y| \sin x \approx x comes from the first term of the Taylor series for sine, and higher-order approximations are obtained by retaining more terms. This approximation is widely used: for example, in Gaussian optics where the behavior of light rays making small angles with an axis is studied by replacing the sine function with its linear approximation.

Such approximations are used throughout mathematics, physics, and engineering. In perturbation theory, a complicated quantity is often expanded in powers of a small parameter, and the first few terms are used as an approximate solution.

Taylor expansions also occur in the analysis of the simple pendulum and in numerical methods for approximating functions. e^{x} = \sum^{\infty}_{n=0} \frac{x^n}{n!} = 1 + x + \frac{x^2}{2!} + \frac{x^3}{3!} + \cdots. It converges for all .

The exponential generating function of the Bell numbers is the exponential function of the predecessor of the exponential function: \exp(\exp{x}-1) = \sum_{n=0}^{\infty} \frac{B_n}{n!}x^{n} \begin{align} \ln(1-x) &= - \sum^{\infty}_{n=1} \frac{x^n}n = -x - \frac{x^2}2 - \frac{x^3}3 - \cdots , \\ \ln(1+x) &= \sum^\infty_{n=1} (-1)^{n+1}\frac{x^n}n = x - \frac{x^2}2 + \frac{x^3}3 - \cdots . \end{align} The last series is known as Mercator series, named after Nicholas Mercator since it was published in his 16681 treatise Logarithmotechnia. Both of these series converge for .

In addition, the series for converges for , and the series for converges for . \begin{align} \frac{1}{1-x} &= \sum^\infty_{n=0} x^n \\ \frac{1}{(1-x)^2} &= \sum^\infty_{n=1} nx^{n-1} \\ \frac{1}{(1-x)^3} &= \sum^\infty_{n=2} \frac{(n-1)n}{2} x^{n-2}. \end{align} All are convergent for . These are special cases of the binomial series given in the next section.

(1+x)^\alpha = \sum_{n=0}^\infty \binom{\alpha}{n} x^n whose coefficients are the generalized binomial coefficients \binom{\alpha}{n} = \prod_{k=1}^n \frac{\alpha-k+1}k = \frac{\alpha(\alpha-1)\cdots(\alpha-n+1)}{n!}. (If , this product is an empty product and has value .) It converges for for any real or complex number .

When , this is essentially the infinite geometric series mentioned in the previous section. The special cases and give the square root function and its inverse: \begin{align} (1+x)^\frac{1}{2} &= 1 + \frac{1}{2}x - \frac{1}{8}x^2 + \frac{1}{16}x^3 - \frac{5}{128}x^4 + \frac{7}{256}x^5 - \cdots &= \sum^{\infty}_{n=0} \frac{(-1)^{n-1}(2n)!}{4^n (n!)^2 (2n-1)} x^n, \\ (1+x)^{-\frac{1}{2}} &= 1 -\frac{1}{2}x + \frac{3}{8}x^2 - \frac{5}{16}x^3 + \frac{35}{128}x^4 - \frac{63}{256}x^5 + \cdots &= \sum^{\infty}_{n=0} \frac{(-1)^n(2n)!}{4^n (n!)^2} x^n. \end{align} When only the linear term is retained, this simplifies to the binomial approximation. \begin{align} \sin x &= \sum^{\infty}_{n=0} \frac{(-1)^n}{(2n+1)!} x^{2n+1} &&= x - \frac{x^3}{3!} + \frac{x^5}{5!} - \cdots && \text{for all } x\\[6pt] \cos x &= \sum^{\infty}_{n=0} \frac{(-1)^n}{(2n)!} x^{2n} &&= 1 - \frac{x^2}{2!} + \frac{x^4}{4!} - \cdots && \text{for all } x\\[6pt] \tan x &= \sum^{\infty}_{n=1} \frac{B_{2n} (-4)^n \left(1-4^n\right)}{(2n)!} x^{2n-1} &&= x + \frac{x^3}{3} + \frac{2 x^5}{15} + \cdots && \text{for }|x| All angles are expressed in radians.

The numbers appearing in the expansions of are the Bernoulli numbers. The in the expansion of are Euler numbers. \begin{align} \sinh x &= \sum^{\infty}_{n=0} \frac{x^{2n+1}}{(2n+1)!} &&= x + \frac{x^3}{3!} + \frac{x^5}{5!} + \cdots && \text{for all } x\\[6pt] \cosh x &= \sum^{\infty}_{n=0} \frac{x^{2n}}{(2n)!} &&= 1 + \frac{x^2}{2!} + \frac{x^4}{4!} + \cdots && \text{for all } x\\[6pt] \tanh x &= \sum^{\infty}_{n=1} \frac{B_{2n} 4^n \left(4^n-1\right)}{(2n)!} x^{2n-1} &&= x-\frac{x^3}{3}+\frac{2x^5}{15}-\frac{17x^7}{315}+\cdots && \text{for }|x| The numbers appearing in the series for are the Bernoulli numbers. \begin{align} \text{Li}_{2}(x) &= \sum_{n = 1}^{\infty} \frac{1}{n^2} x^{n} \\\text{Li}_{3}(x) &= \sum_{n = 1}^{\infty} \frac{1}{n^3} x^{n} \end{align} The Legendre chi functions are defined as follows: \begin{align} \chi_{2}(x) &= \sum_{n = 0}^{\infty} \frac{1}{(2n + 1)^2} x^{2n + 1} \\ \chi_{3}(x) &= \sum_{n = 0}^{\infty} \frac{1}{(2n + 1)^3} x^{2n + 1} \end{align} And the formulas presented below are called inverse tangent integrals: \begin{align} \text{Ti}_{2}(x) &= \sum_{n = 0}^{\infty} \frac{(-1)^{n}}{(2n + 1)^2} x^{2n + 1} \\ \text{Ti}_{3}(x) &= \sum_{n = 0}^{\infty} \frac{(-1)^{n}}{(2n + 1)^3} x^{2n + 1} \end{align} These formulas occur in statistical mechanics.

Integrals encountered in Bose–Einstein and Fermi–Dirac statistics can be expressed in terms of polylogarithms. The inverse tangent integral value \text{Ti}_2(1/\sqrt{3}) appears in the per-site entropy of spanning trees on a large triangular lattice. \begin{align} \frac{2}{\pi}K(x) &= \sum_{n = 0}^{\infty} \frac{[(2n)!]^2}{16^{n}(n!)^4}x^{2n} \\ \frac{2}{\pi}E(x) &= \sum_{n = 0}^{\infty} \frac{[(2n)!]^2}{(1 - 2n)16^{n}(n!)^4}x^{2n} \end{align} The Jacobi theta functions describe the world of the elliptic modular functions and they have these Taylor series: \begin{align} \vartheta_{00}(x) &= 1 + 2\sum_{n = 1}^{\infty} x^{n^2} \\ \vartheta_{01}(x) &= 1 + 2\sum_{n = 1}^{\infty} (-1)^{n} x^{n^2} \end{align}

Text derived from https://en.wikipedia.org/w/index.php?oldid=1377126901 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Taylor series” revision 1377126901 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL

Provenance

snapshot enwiki-001377126901 · captured 2026-09-27 · ledger · version history

Cite this page as: encyclopegia.org, “Taylor series”, snapshot enwiki-001377126901. https://encyclopegia.org/a/taylor-series