Teletext

index page from September 2001, showing news about the September 11 attacks|255x255px Teletext, or broadcast teletext, is a standard for displaying text and rudimentary graphics on suitably equipped television sets. Teletext sends data in the broadcast signal, hidden in the invisible vertical blanking interval (VBI) area at the top and bottom of the screen. The teletext decoder in the television buffers this information as a series of "pages", each given a number. The user can display chosen pages using their remote control. Teletext was uni-directional: the user could only receive, and not respond or send data of their own. Teletext was created in the United Kingdom in the early 1970s by John Adams, Philips' lead designer for video display units to provide closed captioning to television shows for the hearing impaired. Public teletext information services were introduced by major broadcasters in the UK, starting with the BBC's Ceefax service in 1974. It offered a range of text-based information, typically including news, weather and TV schedules. Similar systems were subsequently introduced by other television broadcasters in various countries, with launches in West Germany (ARD and ZDF's Videotext) and the Netherlands (NOS's Teletekst) in 1980.…

index page from September 2001, showing news about the September 11 attacks|255x255px]] Teletext, or broadcast teletext, is a standard for displaying text and rudimentary graphics on suitably equipped television sets. Teletext sends data in the broadcast signal, hidden in the invisible vertical blanking interval (VBI) area at the top and bottom of the screen. The teletext decoder in the television buffers this information as a series of "pages", each given a number. The user can display chosen pages using their remote control. Teletext was uni-directional: the user could only receive, and not respond or send data of their own. Teletext was created in the United Kingdom in the early 1970s by John Adams, Philips' lead designer for video display units to provide closed captioning to television shows for the hearing impaired. Public teletext information services were introduced by major broadcasters in the UK, starting with the BBC's Ceefax service in 1974. It offered a range of text-based information, typically including news, weather and TV schedules. Similar systems were subsequently introduced by other television broadcasters in various countries, with launches in West Germany (ARD and ZDF's Videotext) and the Netherlands (NOS's Teletekst) in 1980. )]] Teletext formed the basis for the World System Teletext standard (CCIR Teletext System B), an extended version of the original system. This standard saw widespread use across Europe starting in the 1980s, with almost all television sets including a decoder. Other standards were developed around the world, notably NABTS (CCIR Teletext System C) in the United States, Antiope (CCIR Teletext System A) in France and JTES (CCIR Teletext System D) in Japan, but these were never as popular as their European counterpart and most closed by the early 1990s. Teletext inspired the later Videotex system that enabled bi-directional communication in a format later recognised as a prototype of the World Wide Web (WWW). Implementations included the French Minitel and the British Prestel. Introduced by the General Post Office, Prestel used Teletext's display standards but instead ran over bi-directional telephone lines using modems. Most European teletext services continued to exist in one form or another until well into the 2000s when the expansion of the Internet precipitated a closure of some of them. However, many European television stations continue to provide teletext services and even make teletext content available via web and dedicated apps. The recent availability of digital television has led to more advanced systems being provided that perform the same task, such as MHEG-5 and Multimedia Home Platform. The rate is , i.e. the TV line frequency. Thus 625 × 25 × 444 = 6,937,500 Hz. Each bit will then be 144 ns long. The bandwidth amplitude is 50% at 3.5 MHz and 0% at 6 MHz. If the horizontal sync pulse during the vertical synchronization starts in the middle of the horizontal scan line. Then first interlace frame will be sent, otherwise, if vertical synchronization let the full video line complete the second interlace frame is sent. Like EIA-608, bits are transmitted in the order of LSB to MSB with odd parity coding of 7-bit character codes. However unlike EIA-608, the DVB version is transmitted the same way. For single bit error recovery during transmission, the packet address (page row and magazine numbers) and header bytes (page number, subtitle flag, etc.) use hamming code 8/4 with extended packets (header extensions) using hamming 24/18 , which basically doubles the bits used. The commonly used standard B uses a fixed PAL subtitling bandwidth of 8,600 (7,680 without page/packet header) bits/s per field for a maximum of 32 characters per line per caption (maximum three captions – lines 19 – 21) for a 25 frame broadcast. While the bandwidth is greater than EIA-608, so is the error rate with more bits encoded per field. Subtitling packets use a lot of non-boxed spacing to control the horizontal positioning of a caption and to pad out the fixed packet. The vertical caption position is determined by the packet address. In the case of the Ceefax and ORACLE systems and their successors in the UK, the teletext signal is transmitted as part of the ordinary analog TV signal but concealed from view in the Vertical Blanking Interval (VBI) television lines which do not carry picture information. The teletext signal is digitally coded as 45-byte packets, so the resulting rate is 7,175 bits per second per line (41 7-bit 'bytes' per line, on each of 25 frames per second). A teletext page comprises one or more frames, each containing a screen-full of text. The pages are sent out one after the other in a continual loop. When the user requests a particular page the decoder simply waits for it to be sent, and then captures it for display. In order to keep the delays reasonably short, services typically only transmit a few hundred frames in total. Even with this limited number, waits can be up to 30 seconds, although teletext broadcasters can control the speed and priority with which various pages are broadcast. Modern television sets, however, usually have built-in memory, often for a few thousand different pages. This way, the teletext decoder captures every page sent out and stores it in memory, so when a page is requested by the user it can be loaded directly from memory instead of having to wait for the page to be transmitted. When the page is transmitted again, the decoder updates the page in memory. The text can be displayed instead of the television image, or superimposed on it (a mode commonly called mix). Some pages, such as subtitles (closed captioning), are in-vision, meaning that text is displayed in a block on the screen covering part of the television image. The original standard provides a monospaced 40×24 character grid. Characters are sent using a 7-bit codec, with an 8th bit employed for error detection. The standard was improved in 1976 (World System Teletext Level 1) to allow for improved appearance and the ability to individually select the color of each character from a palette of eight. The proposed higher resolution Level 2 (1981) was not adopted in Britain (in-vision services from Ceefax & ORACLE did use it at various times, however, though even this was ceased by the BBC in 1996), although transmission rates were doubled from two to four lines a frame.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1378822210 under CC BY-SA 4.0; modifications have been made.