Lesson plan
TEM-function
In petroleum engineering, true effective mobility (TEM), also called TEM-function is a criterion to characterize dynamic two-phase flow characteristics of rocks (or dynamic rock quality). TEM is a function of relative permeability, porosity, absolute permeability and fluid viscosity, and can be determined for each fluid phase separately. TEM-function has been derived from Darcy's law for multiphase flow. : \mathit{TEM} = \frac{k k_{\mathit{r}}}{\phi \mu} in which k is the absolute permeability, k_\mathit{r} is the relative permeability, φ is the porosity, and μ is the fluid viscosity. Rocks with better fluid dynamics (i.e., experiencing a lower pressure drop in conducting a fluid phase) have higher TEM versus saturation curves. Rocks with lower TEM versus saturation curves resemble low quality systems. TEM-function in analyzing relative permeability data is analogous with Leverett J-function in analyzing capillary pressure data. Furthermore, TEM-function in two-phase flow systems is an extension of RQI (rock quality index) for single-phase systems. Also, TEM-function can be used for averaging relative permeability curves (for each fluid phase separately, i.e., water, oil, gas, ).…
Article summary
In petroleum engineering, true effective mobility (TEM), also called TEM-function is a criterion to characterize dynamic two-phase flow characteristics of rocks (or dynamic rock quality). TEM is a function of relative permeability, porosity, absolute permeability and fluid viscosity, and can be determined for each fluid phase separately. TEM-function has been derived from Darcy's law for multiphase flow. : \mathit{TEM} = \frac{k k_{\mathit{r}}}{\phi \mu} in which k is the absolute permeability, k_\mathit{r} is the relative permeability, φ is the porosity, and μ is the fluid viscosity. Rocks with better fluid dynamics (i.e., experiencing a lower pressure drop in conducting a fluid phase) have higher TEM versus saturation curves. Rocks with lower TEM versus saturation curves resemble low quality systems. TEM-function in analyzing relative permeability data is analogous with Leverett J-function in analyzing capillary pressure data. Furthermore, TEM-function in two-phase flow systems is an extension of RQI (rock quality index) for single-phase systems. Also, TEM-function can be used for averaging relative permeability curves (for each fluid phase separately, i.e., water, oil, gas, ).…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.